Hisense U6HF Series Quick Setup Manual page 14

Insert the batteries
Remove the battery door and insert the two AAA batteries into your Alexa Voice
Remote.
Important information about the remote and batteries
• Discard batteries in a designated disposal area. Do not throw them into a fire.
• Remove old batteries immediately to prevent them from leaking into the battery
compartment.
• If you do not intend to use the remote control for a long time, then remove the
batteries.
• Battery chemicals can cause a rash. If the batteries leak, clean the battery
compartment with a cloth. If chemicals touch your skin then wash it
immediately.
• Do not mix old and new batteries.
• Only use new 1.5v alkaline or 1.2NiMH rechargeable AAA sized batteries. Do
not mix alkaline or rechargeable NiMH batteries.
• Do not continue using the remote if it gets warm or hot.
• Call our Support Center immediately on the support website.
Using your cable set-top box or satellite receiver remote as a 'universal'
remote
If you prefer to use your Cable Set-top Box or Satellite Receiver Remote as a 'universal'
remote, then visit the Support page to view a list of the codes.
11