NOTE: Additional safety equipment may be required depending on the operating environment and worksite conditions. Only qualified and trained personnel should operate, maintain, and service this attachment. Skid Pro recommends that you inspect this equipment regularly for leaks, cracks, or other conditions that may impair proper usage of the equipment.
NOTE: Hydraulic connections must be disconnected before disengaging latches to prevent damage to the carrier machine or the attachment. 3. Disengage the carrier machine latches (or other locking mechanisms) from the attachment. 4. Move the carrier machine from the attachment. Skid Pro GB2 Brush Mower Manual Rev. 11/13/2023 Page 3...
Eye and Ear Protection: To help ensure your safety as a designated operator wear eye and ear protection. Safety Helmet: To help ensure your safety as a designated operator wear a safety helmet. Skid Pro GB2 Brush Mower Manual Rev. 11/13/2023 Page 4...
Inspect the blades for cracks, bends, or excessive wear. Check skid plates for wear. Inspect the bolts on the motor. Tighten if required. Check that all bolts are tight. Skid Pro GB2 Brush Mower Manual Rev. 11/13/2023 Page 5...
Has all debris been removed from the motor area? Has the carrier machine been properly inspected for hydraulic leaks and proper tire inflation? Has the carrier machine been properly maintained? SAFETY CHAIN PLACEMENT Skid Pro GB2 Brush Mower Manual Rev. 11/13/2023 Page 6...
Page 9
2X2.50 "ATTENTION CHECK OIL" DECAL-3-0006 2.250X10 "DANGER" DECAL-3-0003 4X5 "72" ORANGE & BLACK DECAL-3-0004 3X10 "WARNING" DECAL-3-0005 2.50X10 "SKID PRO" CLEAR BACK DECAL-3-0010 5X5 "DO NOT OPERATE WITHOUT SA DECAL-3-0011 4X6 "CAUTION 25 GPM MAX!" DECAL-3-0008 3X5 "HIGH PRESSURE FLUID" DECAL-3-0034 SILVER 72"...
Page 10
2X2.50 "ATTENTION CHECK OIL" DECAL-3-0006 2.250X10 "DANGER" DECAL-3-0142 4X5 "60" ORANGE & BLACK DECAL-3-0004 3X10 "WARNING" DECAL-3-0005 2.50X10 "SKID PRO" CLEAR BACK DECAL-3-0010 5X5 "DO NOT OPERATE WITHOUT SA DECAL-3-0011 4X6 "CAUTION 25 GPM MAX!" DECAL-3-0008 3X5 "HIGH PRESSURE FLUID" DECAL-3-0039 SILVER 60"...
If it is determined the defective parts are to be returned and they are not received by Skid Pro within 30 days of receiving the replacement parts, the Buyer will be charged for the cost of the replacement parts plus any shipping charges.
Need help?
Do you have a question about the GB2 and is the answer not in the manual?
Questions and answers