Summary of Contents for Carnival King 382PW35PUMP
- Page 1 Assembly and Care Instructions 382PW35PUMP Part Included Food Grade PP Pump 05/23 Info@CarnivalKingSupplies.com | CarnivalKingSupplies.com...
- Page 2 Assembly and Care Instructions 382PW35PUMP Plunger Assembly Plastic Pump Knob Locking Collar Head Tube Head Insert Spring White Washer Piston Orange Silicon O-Ring 2. Valve Body and Plunger Cylinder Plunger Cylinder Valve Body (integrated with Plunger Cylinder) 3. Pump Discharge Tube Assembly...
-
Page 3: Pump Cleaning
NOTE: Pump is not insulated and is not intended to maintain cold temperatures. Pump Cleaning Regular cleaning and maintenance of your Carnival King pump will ensure proper operation and ultimate performance. For pumps that have been in use, flush and rinse all pump parts with hot water by removing the pump from the body and putting the lower portion of the pump (valve body) into hot water. -
Page 4: Pump Assembly
Assembly and Care Instructions 382PW35PUMP Disassembly Remove the pump discharge tube assembly (3) by using a flat head screwdriver to loosen and remove “U” pin fixture (N). Set aside “U” pin fixture and pull on pump discharge tube to release from valve body (J). -
Page 5: Troubleshooting
Assembly and Care Instructions 382PW35PUMP Troubleshooting Problems with worn out o-rings, springs, and improperly installed parts can result in issues with food product leaking out of the pump plunger, or dripping from the pump discharge tube, or the plunger not returning properly after dispensing.
Need help?
Do you have a question about the 382PW35PUMP and is the answer not in the manual?
Questions and answers