Download Print this page
8STREME XT3 Instruction Manual

8STREME XT3 Instruction Manual

Above ground automatic swimming pool cleaner

Advertisement

ABOVE GROUND AUTOMATIC
SWIMMING POOL CLEANER
8STREME
INSTRUCTION MANUAL
FOR MODELS
XT3,BLAZE,5222,VTB300
XL300 TP2222
ENGLISH

Advertisement

loading

Summary of Contents for 8STREME XT3

  • Page 1 ABOVE GROUND AUTOMATIC SWIMMING POOL CLEANER 8STREME INSTRUCTION MANUAL FOR MODELS XT3,BLAZE,5222,VTB300 XL300 TP2222 ENGLISH...
  • Page 2: Table Of Contents

    10 Troubleshooting p13. Congratulations on the purchase of your new 8STREME Above Ground pool cleaner. It is a powerful autonomous robot delivered ready to use. This robot comes with an easy accessible debris basket along with floating rotary coupling 11 Spare parts list pl 6.
  • Page 3: Product Features

    01 Product features 03 Pack contents 02 !! Warnings and Safety informations !! QUICK FACTS Maximum Depth: 5 ft Maximum size of the pool: 28ft Input current: 100-130VAC Output current: < 22VDC 1. 5222 Robotic pool cleaner 2. Power transformer control box 3.
  • Page 4: Start-Up

    04 Start-up 4. 3 Slide the cap to contact the plug of the 4. 1 Insert the end of the floating cable into the 4. 2 Insert the end of the floating cable from 4. 6 Place your power box to a midpoint between 4.
  • Page 5: Indicator Lights/ Led P09

    05 Indicator lights I LED MEANING I DIAGNOSIS INDICATOR LIGHT/LED 4.10 For optimal performance, place your robot 4.11 To turn off your robot, press the switch on the in the pool at the furthest possible location power supply to the OFF Position from the power source.
  • Page 6: Adjusting Direction And Speed Control

    06 Adjusting Direction and Speed Control 07 Cleaning the filter basket 6.1 To adjust the direction of the robot, rotate the Note: with indicator on vertical position, the robot 6.2 To adjust the speed of the robot, slide the outlet cover. The direction of the robot will be will go straight ahead.
  • Page 7: Side Suction

    08 Side suction 10 Troubleshooting 09 Cleaning the impeller PROBLEM CAUSE(S) SOLUTION(S) NOTE: A pair of side suction flap is provided to increase the vacuum path width up to 16 in. - When you put the robot in the pool, let it sink and reach the floor before you turn it on.
  • Page 8 - Check the status of the connectors at the ends of - Possibility of motor leakage your cables (damaged, rusted, etc.) Please contact www.8streme.com if you have any other questions. - Check the basket and clean it if necessary. - Check that there are no foreign objects in the - The robot is too heal(Y impellers.
  • Page 9 11 Spare parts list and drawing Page 16...

This manual is also suitable for:

Blaze5222Vtb300Xl300Tp2222