In the Available wireless networks list, click the network
2
name (SSID) for the access point you want to connect to
(typically, the SSID for your wireless router or gateway).
If you selected an SSID without a network key (WEP or
•
WPA) associated with it, click Allow me to connect to
the selected wireless network, even though it is not
secure, then click Connect. See the Wireless Network
Connection screen shown above.
If you selected an SSID with a network key, enter it in
•
the Network key field, re-enter it in the Confirm
network key field, un-check Enable IEEE 802.1x
authentication for this network, then click Connect.
See the Wireless Network Connection screen shown
on the next page.
IMPORTANT: Be sure to un-check Enable IEEE 802.1x
•
authentication for this network.
8
ViewSonic Wireless USB Adapter
An access point
(SSID) that does
not have a network
key (WEP or WPA)