Hardware Installation
1.
Plug the enclosed USB cable into the camera and the USB port on the PC separately.
(To avoid low voltage, it is recommended to plug the cable connector to USB port on PC
directly)
2.
The camera LED indicator will light up upon successful installation.
Notice:
Please download the latest update of "Service Pack" (from Start → Window Update) to keep
the camera running smoothly.
Attention:
I f y o u h a v e m o r e t h a n o n e i m a g e d e v i c e i n y o u r s y s t e m , p l e a s e s e l e c t t h e
ViewSonic W2201 Webcam as the PC Camera device. In this way, you can use this camera to
capture images.
ViewSonic
W2201
8