Quick Setup/Software Installation; Usb - ViewSonic ViewMate CC2201 User Manual

Quick Setup/ Software Installation
The supplied CD-ROM contains important software drivers necessary for your
keyboard and mouse to operate.
Installing the keyboard/Mouse using a USB Connection:
Connect the keyboard
1.
and Mouse to the
USB port as shown below.
2.
Insert the ViewSonic Wizard CD
into your computer's CD drive.
Wait for the CD-ROM to auto-
start. If your computer does not
have a CD-ROM drive, contact
Customer Support.
If the CD-ROM does not auto-
start: double-click on the CD-
ROM icon in Windows Explorer,
then double-click on setup.exe.
Follow the on-screen instructions:
select Software Install or View the
user guide.
USB connector
ViewSonic ViewMate™ Desktop CC2201
3.
Restart your computer.
To be best prepared for any
future customer service needs:
print this user guide and write
the serial number in "For Your
Records" on page 2. The serial
number is on the bottom of the
keyboard.
You can register your product
online at the website for your
region. See the Customer
Support table in this guide.
The ViewSonic Wizard CD-ROM
also provides an opportunity for
you to print the registration form
which you may mail or fax to
ViewSonic.
4