Advertisement
6. Start the engine. After engine has
started, move throttle control to idle
position.
7.
Depress clutch/orake pedal into full
"BRAKE" position and hold. Move
gearshift lever to 1st gear.
8.
Slowly release clutch/orake pedal and
slowly drive tractor off skid.
9.
Apply brake to stop tractor, set park-
ing brake and place gearshift lever in
neutral position.
10. Turn ignition key to "STOP" position.
Continue with the instructions that follow.
REPOSITION RIGHT REAR GAUGE
WHEEL
For shipping purposes, the right rear
gauge wheel assembly is mounted upside
down on the mower. Remove the gauge
wheel assembly and reinstall from the
bottom as shown. To adjust gauge wheels,
see the Operation section in this manual.
INSTALL
MULCHER
PLATE
(If previously removed)
1.
Raise and hold deflector shield in
upright position.
2.
Place front of mulcher plate over front
of mower deck opening and slide into
place, as shown.
8.
Hook front latch into hole on front of
mower deck.
4.
Hook rear latch into hole on back of
mower deck.
Deflector
Shield
Mulcher
Plate
AcautTion:
Do not remove deflector
shield from mower.
TO CONVERT TO BAGGING OR
DISCHARGING
Simply remove mulcher plate and store in
a safe place. Your mower is now ready for
discharging or installation of optional grass
catcher accessory.
NOTE:
It is not necessary to change
blades.
The mulcher blades are designed
for discharging and bagging also.
Advertisement
