Table of Contents
Advertisement
Troubleshooting
If the product cannot charge or power other devices,
please check according to the following steps:
·
Make sure the output port is on and the LED indicator above the power
button lights up in red.
·
Please check the remaining power indicator on the LCD. If it is at 20%
or below, please recharge the product as soon as possible.
·
Please check your electronic device's required power to see whether
it exceeds the maximum output power of the product.
·
Please check your electronic device connection to see whether it is
well connected.
·
If the screen cannot display well, such as blank or with garbled code,
please press and hold the screen switch for about 5 seconds to reboot.
Note: If there are some problems with your Discover 600,
please contact us at service@nurzviy.com.
Storage and Maintenance
·
Full charge the unit before storage and switch off all power buttons.
·
Keep it in a cool, dry place for long-term storage. Temperature within
32~104℉(0~40℃)，avoid direct sunlight.
·
Keep the battery lying flat during recharging, charging or storing.
·
Clean the unit with a dry cloth gently and carefully.
·
DO NOT stack anything on top of the unit either in storage or in use.
·
Full charge the unit at least once every 3 months.
12
Advertisement
Table of Contents
