Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Midea HICONICS HEC2-MP69r1
Summary of Contents for Midea HICONICS HEC2-MP69r1
- Page 1 LITHIUM-ION BATTERY PRODUCT MANUAL HEC2-MP69r1 HEC2-SP69r1...
- Page 2 Copyright Statement Please keep the manual properly and operate in strict accordance with all safety and operating instructions in this manual. Please do not operate the system before reading through the manual. Copyright Statement Contact the nearest hazardous waste disposal station when the products or components are discarded.
-
Page 3: Table Of Contents
Table of Contents 1 Safety ....................................2 Mark Instructions................................2 1.2 Operation Requirements of Manual..........................2 1.3.1 Safety Principle..............................2 1.3.2 Emergency Treatment............................2 2 Product Introduction ..............................2 Introduction..................................2 2.2 Basic Functions................................3 2.4 Dimensions & Weight..............................3 2.5 Product Configuration.............................. -
Page 4: Safety
User Manual 1-Safety 1.3 Precautions 1.3.1 Safety Principle 1.1 Mark Instructions Please comply with the following basic principles to install and use the This section explains the dangerous and warning marks related to user’s Product safely: energy storage system, as shown in table below: Avoid strong collision, heavy pressing or piercing of battery Keep the battery away from heat source or high-temperature places, such as fire sources... -
Page 5: Basic Functions
User Manual 2.5 Product Configuration Interfaces and functions of battery pack interface: The battery can be installed as demanded by user and configured as follows: Single master battery pack can have series connection with 4 slave packs maximally. The number of slave battery packs connected by dual master battery packs must be the same;... -
Page 6: Installation Instructions
User Manual 3-Installation Instructions 3.1 Installation Preparation -20 to 60 Charging Temperature[℃] Please install the Product in strict accordance with steps in the Manual; otherwise, Hiconics does not bear any legal liability due to improper assembly Discharging Temperature[℃] -20 to 60 and operation. -
Page 7: Check Accessories
User Manual b. List of accessories of slave battery pack Description/Specification Photos Multimeter Marking pen Ribbon Slave battery pack Level gauge Rack Tape 3.1.5 Check Accessories Once the Product is unpacked, check if the attached product list is consistent PTC series connection harness with the table below: of slave battery pack a. -
Page 8: Steps Of Installation
User Manual 3.2 Steps of Installation 3.2.1 Structure Installation The positioning rack attached in battery pack can be used for simple positioning. Please use it along with the level gauge, in order to correct the horizontal error. Once all racks are installed, the positioning board can be removed. -
Page 9: Install Covering Piece
User Manual 4-Product Debugging Ⅰ 4.1 Hardware Setting The machine can be started immediately after system installation, for the battery pack has been configured before leaving factory. 4.2 Status Introduction Once the battery pack is powered on, its status will be displayed and judged When 2 clusters of master battery packs are used in battery system by LED of master battery pack. -
Page 10: System Startup
User Manual 4.2.3. Faults & Troubleshooting The faults and troubleshooting of battery system are shown in table below. 1.Check if cable and terminal block Please contact the dealer if you don’t have qualified operator. are loose and have the trace of arc discharge and rust. - Page 11 Hiconics Eco-energy Drive Technology Co., Ltd. Add: No.3 Boxing 2nd Road, E-Town, Daxing District, Beijing, China, 100176 Tel: +86 10 5918 0033 Fax: +86 10 5918 0035 Email: huchu@midea.com...
Need help?
Do you have a question about the HICONICS HEC2-MP69r1 and is the answer not in the manual?
Questions and answers