Magic Bullet MBR-0307 User Manual page 4

product safety:
To prevent the overheating of the
ingredients being blended, never
allow the unit to run continuously for
more than 1 minute.
If the motor stops for any reason,
unplug the power base and let it
cool for at least 15 minutes.
If the magic bullet malfunctions or
®
is dropped, or damaged in any
manner, discontinue use
contact Customer Service
further assistance.
NEVER USE THE MAGIC BULLET
WITHOUT ADDING LIQUID OR WHEN
THE CUP IS EMPTY, AS DOING SO
MAY DAMAGE THE BLADE.
5
TO AVOID LEAKAGE, DO NOT
OVERFILL THE CUP. Your magic
bullet cups are also marked with a
®
MAX line. When fi lling the cup or
pitcher, make sure your ingredients
do not exceed their respective
MAX lines.
The magic bullet is not intended
®
for use in microwave ovens. Do not
place the magic bullet
power base or any accessories in a
and
microwave as this may result in
for
damage to the appliance.
®
Extractor blades are
sharp! Handle carefully.
Do not remove the seal from your
blade attachment. The seal is not
designed to be removed. If seal is
removed, cease use immediately
and purchase a replacement.
If, over time, the extractor blade
becomes loose or damaged, you
cups,
®
may order a new extractor blade at:
www.bulletbrands.com.au
www.bulletbrands.co.nz
customer service.
We recommend replacing your
extractor blade every 6 months
(depending on use) or as needed
for optimal performance.
Blade attachments should not be
placed in the dishwasher for
cleaning. Exposure to hot water
can cause damage to the seal in
the outer rim of the attachment.
Always inspect your blades before
each use.
Use of adapters and converters is
considered an
modifi cation of the product and as
such will void the warranty.
The use of attachments
/
recommended or not sold by the
or contact
manufacturer will void warranty
and may cause fi re, electric shock,
or injury.
Use of this product in locations
with diff erent
specifi cations may
damage to the product.
unauthorized
not
electrical
result in
6