Adjusting The Projector - ViewSonic PJD6220 User Manual

Adjusting the Projector

Adjusting the Projector Height
The projector is equipped with an elevator foot to adjust the image height.
To raise or lower the image:
1. To raise or lower the image, press the elevator button and raise or lower the front
of the projector. Release the button to lock the adjustment.
2. To level the image on the screen, turn the tilt-adjustment foot to fine-tune the height.
To avoid damaging the projector, make sure that the elevator foot and tilt-
adjustment foot are fully retracted before placing the projector in its carrying
case.
Adjusting the Projector Zoom and Focus
1. Focus the image by rotating the focus ring. A still image is recommended for focusing.
2. Adjust the image by sliding the zoom ring.
ViewSonic
Zoom ring
Focus ring
Tilt-adjustment foot
Elevator foot
Elevator button
12
PJD6220/PJD6220-3D
PJD6230/PJD6240