Table of Contents
Advertisement
Quick Links
RIBBED PIPE HEAT EXCHANGER
RWT
OPERATING AND
Installation INSTRUCTIONS
Misprints and technical changes reserved.
Please forward this on to the user!
Advertisement
Table of Contents
Summary of Contents for Austria Email RWT
- Page 1 RIBBED PIPE HEAT EXCHANGER OPERATING AND INSTALLATION INSTRUCTIONS Misprints and technical changes reserved. Please forward this on to the user!
- Page 2 RIBBED PIPE HEAT EXCHANGER RWT The heating coils are suitable for the heating of hot water storage tanks with the following heating media: Heating water, district heating water, district heating steam Thermal media such as Antifrogen L, Antifrogen N, PKL 100, PKL 300 Maximum permissible internal operating pressure: 10.0 bar...
- Page 3 Utilisation Naturally it is possible to upgrade both new storage tanks, regardless of whether these are galvanized, enamelled or plastic coated, and existing systems through the installation of RWT-type ribbed pipe heat exchangers. In case of extremely hard water and operation of the storage tank at temperatures above 60 °C, precau- tions should be taken in the form of de-calcification systems or else by implementing a regular cleaning regime (see Maintenance).
- Page 4 8 M12 x 35 screws, and/or 8 M12 nuts for flanges with Ø = 180 (RWT 1-110) or else with 12 M12 x 35 screws and/or M12 nuts for flanges with Ø = 240 (RWT 2-230, -360, -450).
- Page 5 RIBBED PIPE HEAT EXCHANGER RWT Warranty, Guarantee and Product Liability The warranty is granted in accordance with the statutory provisions of the Republic of Austria, as well as of the EU. A condition for the operation of guarantee services by the product manufacturer (hereinafter referred to as the PM) is the presentation of the paid invoice for the purchase of the device for which the guarantee service is being invoked, whereby the identity of the device in terms of type and serial number must be taken from the invoice and must be produced by the claimant.
- Page 6 RIBBED PIPE HEAT EXCHANGER RWT 11. Services not provided within the framework of these guarantee conditions shall be invoiced to the customer. 12. A precondition for the fulfilment of these guarantee provisions by the PM is that, on the one hand the device has been fully paid for and, on the other hand, that the claimant has fully complied with all of his obligations towards the reseller.
- Page 7 RIBBED PIPE HEAT EXCHANGER RWT Notes Id.Nr.: 179390-5 •...
- Page 8 A-8720 Knittelfeld Telefon: (03512) 700-0 Fax: (03512) 700-239 Internet: www.austria-email.at E-Mail: office@austria-email.at Austria Email in your area? For addresses and telephone numbers of our subsidiaries, visit our homepage at www.austria-email.at Print errors and changes of all kinds are reserved. Reproduction prohibited.
Need help?
Do you have a question about the RWT and is the answer not in the manual?
Questions and answers