Selecting An Input Signal; Adjusting Image Size And Focus - ViewSonic PJ750 User Manual

Selecting an Input Signal

Using the remote control
If selecting RGB input
Press the RGB button
Press this button to toggle between the devices
connected to RGB IN 1 and 2. As illustrated
below, each time you press the RGB button, the
projector switches between RGB IN 1 and 2.
Select the signal you wish to project.
If selecting video input
Press the VIDEO button
Press this button to toggle between the devices
connected to VIDEO IN, SVIDEO IN and
COMPONENT VIDEO. As illustrated below,
each time you press the VIDEO button, the pro-
jector switches between VIDEO IN, S-VIDEO
IN and COMPONENT VIDEO. Select the sig-
nal you wish to project.

Adjusting Image Size and Focus

Use the zoom knob to adjust the screen size
Use the focus ring to focus the picture
ViewSonic PJ750
14
Using the projector's control panel
Press the INPUT button
As illustrated below, each time you press the
INPUT button, the projector switches between
its input signal ports. Select the signal you wish
to project.
RGB IN 1 RGB IN 2
COMPONENT VIDEO
VIDEO IN
S-VIDEO IN