Panasonic Omnivision PV-7661 Operating Instructions Manual page 15

Hide thumbs Also See for Omnivision PV-7661:
Table of Contents

Advertisement

If you use a cable box,
D tune it to channe! 02.
If you use a DSS receiver,
tune it to channel 270.
A
[>
* "NOW TRANSMITTING"
«
d
appears.
PLEASE TUNE YOUR OSS
v
RECEIVER TO CH 270.
e
"YES" or "NO," and
If Cable Box
PLEASE TUNE YOUR CABLE
BOX TO CHO2.
:
If DSS Receiver
Push P to continue.
PROCEED: » KEY
END
¡MENU KEY
If Cable Box
Push AV to select
IS YOUR CABLE BOX
If you use a cable box
pe
YES,
If DSS Receiver
you uo a DSS mcer Jnr
the Alternate Instructions
=
on page 16.
SELECT: a ie ret
"
"
SET
If you selected "NO,
END
¿MENU KEY
the screen in step 6 on
page 14 will reappear.
Try entering a different code
assigned to your brand and/ or repositioning
the equipment (see page 13).
If the answer is still *NO," cable box or DSS
receiver control is not available.
Push MENU and go to the Alternate
Instructions on page 16.
Confirm that your cable box is on and
that your DSS receiver is off.
PLEASE ENTER YOUR LOC
Push AV to select
PN
4
» your local PBS channel
10 A a Auto Clock Set.
yo
a) 4
b
auto clock set is Sii ag
e
ON
=
UA
number you receive on
your cable box, and
SET > KEY.
then push P to display
LE
MENU key
the "CLOCK AUTO
SET" screen.
* If you live near a different time
zone, be sure to enter the PBS
channel in your time zone.
OCAL PBS CH
THEN...
PLEASE
PUSH
CH UP KEY
* "AUTO CLOCK SET
PROCEEDING" appears.
This display appears when
nfirm that
the
tim
SETTING : choz
correct and push CH 4
to exit.
AUTO CLOCK SET
COMPLETED
END
: PUSH CH UP KEY
AL
PBS CHANNEL ON CABLE BOX
oe
Soh aah CABLE
F YOU
CABLE
7/25/1997 FRI 12: M
If the Auto Clock Set
displayed time is incorrect...
If you use a cable box and
receive more than one PBS
station, try auto clock set again.
Follow the Set or Reset Auto
Clock Set section on page 17
and when the instructions call for
you to enter a PBS station, enter
the one you have not tried yet.
If "AUTO CLOCK SET
INCOMPLETE" appears...
The screen below will appear
on-screen if auto clock set data
is not available in your area.
AUTO CLOCK SET
iS iNCOMPLETE
PUSH MENU TO SET CLOCK
Push MENU to display the
manual clock set screen.
(See the Manual Clock Set
section on page 16.)
Note:
If you use a cable box and
receive more than one PBS
station, you may exit the manual
clock set screen and try auto
clock set again.
Follow the Set or Reset Auto
Clock Set section on page 17 and
when the instructions call for you
to enter a PBS station, enter the
one you have not tried yet.
* Auto clock set will be performed when the VCR is turned off the first time each day. If you use a cable
box and you want auto clock set to be performed, the cable box must be left on and tuned to the PBS
channel before the VCR power is turned off.
15
G)
(D
ma
=
Q
o
e
9)
=
©
Q.

Advertisement

Table of Contents
loading

Table of Contents