Advertisement
Quick Links
1.
Make sure you turn off Bluetooth and Wi-Fi on your phone before inserting your Hema module. This will prevent
your phone from automatically connecting to the device during the process.
2.
Open up the HXD3 Application.
3.
Once launched in the top right corner, hold the Wi-Fi icon to bring you to the Wi-Fi Settings
AMHXD3
1 of 5
Hema Maps V4 Update Guide
Advertisement
Summary of Contents for Aerpro AMHXD3
- Page 1 Hema Maps V4 Update Guide AMHXD3 Make sure you turn off Bluetooth and Wi-Fi on your phone before inserting your Hema module. This will prevent your phone from automatically connecting to the device during the process. Open up the HXD3 Application.
- Page 2 Hema Maps V4 Update Guide You may have to turn on Wi-Fi if it is currently turned off, then connect to your home network Once you are connected to the internet, press the back button on the AMHXD3, returning you to the HXD3 application Navigate to the Data Sync section, the cloud icon with the arrows, and sync your data with the HemaX cloud if you're logged in.
- Page 3 Hema Maps V4 Update Guide Once finished move onto downloading and installing the new Hema application. (Note, the name and position of these apps may be different on your device. Tap install when prompted and tap open when completed. Tap the Data sync icon again but this time tap the ‘Update Now’ button to update the Points of interest. Go back to the main menu and navigate to the ‘Check for Updates’...
- Page 4 You can check to make sure the maps have transitioned over to the new version by navigating to the ‘Check for Updates’ section again. Lastly, tap the home button the AMHXD3 and navigate to the settings app. 4 of 5...
- Page 5 Hema Maps V4 Update Guide Scroll down and then tap ‘Aerpro Settings’ Tap on ‘Navigation app setup’ and scroll down until you see ‘Google Text-to-Speech Engine’ and choose that option. Press OK. This will ensure the audio seamlessly transitions between Hema Navigation and other audio sources.