1. Manuals
  2. Brands
  3. Servicevision Manuals
  4. Camera Accessories
  5. Scorpio 23'
  6. User manual

Servicevision Scorpio 23' User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Servicevision Bis S.L.
Scorpio
23'
User's manual v1.01

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Scorpio 23' and is the answer not in the manual?

Questions and answers

Related Manuals for Servicevision Scorpio 23'

Summary of Contents for Servicevision Scorpio 23'

  • Page 1 Servicevision Bis S.L. Scorpio 23’ User’s manual v1.01...
  • Page 2 SCORPIO 23’ - INDEX - Basic information Version 1.01 April 21, 2021...
  • Page 3 Basic safety information........................57 Malfunction risks ..........................57 Potential dangers for the user ......................58 SERVICEVISION BIS SL Ríos Rosas, 20 · 08940 CORNELLA DE LLOBREGAT (Barcelona) Spain · Tel. 34 93 223 86 30 · Fax 34 93 223 86 31 comercial@servicevision.es ·...
  • Page 4 SCORPIO 23’ - INDEX - Basic information Version 1.01 April 21, 2021 Protection systems ..........................60 5.4.1 Protection against overloads ........................60 5.4.2 Encoder protection system ........................60 5.4.3 Security circuit board ..........................60 5.4.4 Protection bars and covers ........................60 System shutdown ..........................
  • Page 5 PINOUTS ............................86 Other documentation ......................... 88 11. Marks of the equipment ......................93 SERVICEVISION BIS SL Ríos Rosas, 20 · 08940 CORNELLA DE LLOBREGAT (Barcelona) Spain · Tel. 34 93 223 86 30 · Fax 34 93 223 86 31 comercial@servicevision.es ·...

  • Page 6: Technical Information

    SCORPIO 23’ - TECHNICAL INFORMATION - Basic information Version 1.01 April 21, 2021 TECHNICAL INFORMATION BASIC INFORMATION The Scorpio 23’ cranes are a 3 telescopic sections cranes with a dynamic counterweight system to compensate the balance weight during motion. They are capable to perform smooth movements in high and slow speed with reduced noise of the telescopic arm movement.

  • Page 7: Technical Specifications

    SMALLEST CONFIGURATION Max. Weight when loaded: 1100kg. (2425lbs.) (FOR TRANSPORT ONLY) SERVICEVISION BIS SL Ríos Rosas, 20 · 08940 CORNELLA DE LLOBREGAT (Barcelona) Spain · Tel. 34 93 223 86 30 · Fax 34 93 223 86 31 comercial@servicevision.es ·...
  • Page 8 SCORPIO 23’ - PARTS AND COMPONENTS DESCRIPTION - Technical specifications 23’ Version 1.01 April 21, 2021 PARTS AND COMPONENTS DESCRIPTION This is a general view of the components on the SCORPIO 23’ cranes: Dynamic Counterweight Telescopic arm Leveling Head Electronic box Column Dolly Fulcrum...
  • Page 9 There is a storage position for the locking pin in case it is not locking the direction. SERVICEVISION BIS SL Ríos Rosas, 20 · 08940 CORNELLA DE LLOBREGAT (Barcelona) Spain · Tel. 34 93 223 86 30 · Fax 34 93 223 86 31 comercial@servicevision.es...
  • Page 10 SCORPIO 23’ - PARTS AND COMPONENTS DESCRIPTION - Dolly Version 1.01 April 21, 2021 It is possible to easily remove the steering handle by unscrewing the 4 screws next to the steering lock screw on the steering handle support. The friction screw is used to apply friction on the vertical movement of the steering handle.
  • Page 11 Note: Ensure that the track is leveled before mounting the crane on it. 02.12 Track wheel assembled. SERVICEVISION BIS SL Ríos Rosas, 20 · 08940 CORNELLA DE LLOBREGAT (Barcelona) Spain · Tel. 34 93 223 86 30 · Fax 34 93 223 86 31 comercial@servicevision.es ·...
  • Page 12 SCORPIO 23’ - PARTS AND COMPONENTS DESCRIPTION - Dolly Version 1.01 April 21, 2021 Notice before assembling the track wheels that there are 2 of them with a movable axis side to side and 2 fixed. This is to correct the minor differences between both sides of the track.
  • Page 13 02.15 Visual limit column mark. 02.16 23’Column measures. SERVICEVISION BIS SL Ríos Rosas, 20 · 08940 CORNELLA DE LLOBREGAT (Barcelona) Spain · Tel. 34 93 223 86 30 · Fax 34 93 223 86 31 comercial@servicevision.es ·...
  • Page 14 SCORPIO 23’ - PARTS AND COMPONENTS DESCRIPTION - Fulcrum Version 1.01 April 21, 2021 FULCRUM The fulcrum is where the Scorpio 23’ arm pivots in pan and tilt axes. It is attached to the column with 8 screws (DIN 912 M10x35mm). It is possible to attach the fulcrum in a different structure with a flat base.
  • Page 15 There is only one position to mount the arm since both sides of the fulcrum have different widths. 02.21 Fulcrum’s sliding plate. SERVICEVISION BIS SL Ríos Rosas, 20 · 08940 CORNELLA DE LLOBREGAT (Barcelona) Spain · Tel. 34 93 223 86 30 · Fax 34 93 223 86 31 comercial@servicevision.es ·...

  • Page 16: Telescopic Arm

    SCORPIO 23’ - PARTS AND COMPONENTS DESCRIPTION - Telescopic arm Version 1.01 April 21, 2021 TELESCOPIC ARM The arm of the crane is made up of different aluminum sections that extends or retracts automatically controlled by an operator with the Hand Command. In this chapter we will focus on the arm itself, the mechanics in it and how to strap it safely.
  • Page 17 Do not do this operation alone, the Electronic Box is heavy. 02.31 Locker screw for Electronic box. SERVICEVISION BIS SL Ríos Rosas, 20 · 08940 CORNELLA DE LLOBREGAT (Barcelona) Spain · Tel. 34 93 223 86 30 · Fax 34 93 223 86 31 comercial@servicevision.es ·...
  • Page 18 SCORPIO 23’ - PARTS AND COMPONENTS DESCRIPTION - Telescopic arm Version 1.01 April 21, 2021 2.4.1.1 INSIDE THE MAIN SECTION, MOVING THE FIRST SECTION Inside the main section there is located the motor of the arm. This motor has an encoder attached to it to control the position of the crane.
  • Page 19 “female” part of the counterweights. 02.43 Center position of the telescopic. SERVICEVISION BIS SL Ríos Rosas, 20 · 08940 CORNELLA DE LLOBREGAT (Barcelona) Spain · Tel. 34 93 223 86 30 · Fax 34 93 223 86 31 comercial@servicevision.es...
  • Page 20 SCORPIO 23’ - PARTS AND COMPONENTS DESCRIPTION - Telescopic arm Version 1.01 April 21, 2021 The counterweights are fastened onto the weight holders by two screws. These screws have an intermediate locking nut to be able to tighten different amounts of weights easily. These screws have two locking positions (fig.
  • Page 21 02.53 Cable holders under the main section. SERVICEVISION BIS SL Ríos Rosas, 20 · 08940 CORNELLA DE LLOBREGAT (Barcelona) Spain · Tel. 34 93 223 86 30 · Fax 34 93 223 86 31 comercial@servicevision.es ·...
  • Page 22 SCORPIO 23’ - PARTS AND COMPONENTS DESCRIPTION - Telescopic arm Version 1.01 April 21, 2021 2.4.3 TELESCOPIC SECTIONS The telescopic crane is made up of three telescopic aluminum tubes. Each one of them is supported in the section before it by a system of guide wheels and rails. To move each section there is a cable system that links each section with the second before it.
  • Page 23 02.64 Link to move the second section. SERVICEVISION BIS SL Ríos Rosas, 20 · 08940 CORNELLA DE LLOBREGAT (Barcelona) Spain · Tel. 34 93 223 86 30 · Fax 34 93 223 86 31 comercial@servicevision.es ·...
  • Page 24 SCORPIO 23’ - PARTS AND COMPONENTS DESCRIPTION - Telescopic arm Version 1.01 April 21, 2021 In the end of the last section there is the Leveling Head Fastening Plate. It is hold with four bolts and if the screws are loose, there is a slight play side to side to finish adjusting the lateral level at the end of the crane.
  • Page 25 SERVICEVISION BIS SL Ríos Rosas, 20 · 08940 CORNELLA DE LLOBREGAT (Barcelona) Spain · Tel. 34 93 223 86 30 · Fax 34 93 223 86 31 comercial@servicevision.es...
  • Page 26 SCORPIO 23’ - PARTS AND COMPONENTS DESCRIPTION - Electronic box Version 1.01 April 21, 2021 ELECTRONIC BOX The electronic box is in the rear bottom part of the main section. It has all the electronic components to control the position of the crane, move the motor located inside the arm and the motor for the counterweights.
  • Page 27 Serial PC connector (To know more about this, go to chapter 8 Special configurations). SERVICEVISION BIS SL Ríos Rosas, 20 · 08940 CORNELLA DE LLOBREGAT (Barcelona) Spain · Tel. 34 93 223 86 30 · Fax 34 93 223 86 31 comercial@servicevision.es ·...
  • Page 28 SCORPIO 23’ - PARTS AND COMPONENTS DESCRIPTION - Electronic box Version 1.01 April 21, 2021 02.74 Side connectors 2. SERIAL PC: This connector gives an output of the encoder data used in augmented reality scenarios (To know more about this, go to chapter 8 Special configurations).
  • Page 29 SERVICEVISION BIS SL Ríos Rosas, 20 · 08940 CORNELLA DE LLOBREGAT (Barcelona) Spain · Tel. 34 93 223 86 30 · Fax 34 93 223 86 31 comercial@servicevision.es...

  • Page 30: Electronic Components

    SCORPIO 23’ - PARTS AND COMPONENTS DESCRIPTION - Electronic box Version 1.01 April 21, 2021 2.5.3 ELECTRONIC COMPONENTS 02.77 Electronic components in the EB. A. Relay board for ARM and H.C.: Receive the information of the Magnetic limits of the crane and translates it to the CCU.
  • Page 31 Board for Driver Driver Board for Board for Motor Motor Motor SERVICEVISION BIS SL Ríos Rosas, 20 · 08940 CORNELLA DE LLOBREGAT (Barcelona) Spain · Tel. 34 93 223 86 30 · Fax 34 93 223 86 31 comercial@servicevision.es · www.servicevision.es...

  • Page 32: Stop Button

    SCORPIO 23’ - PARTS AND COMPONENTS DESCRIPTION - Hand command Version 1.01 April 21, 2021 HAND COMMAND The Hand command for the Scorpio Cranes has a digital board inside that controls the functions of the different buttons and Rockers of the Hand Command (H.C.) and communicates with the Electronic box using a serial communication protocol.
  • Page 33 LH from the crane unscrewing the 6 bolts and mount it with the Mitchell mount in the upper part of the SERVICEVISION BIS SL Ríos Rosas, 20 · 08940 CORNELLA DE LLOBREGAT (Barcelona) Spain · Tel. 34 93 223 86 30 · Fax 34 93 223 86 31 comercial@servicevision.es...
  • Page 34 SCORPIO 23’ - PARTS AND COMPONENTS DESCRIPTION - Leveling head Version 1.01 April 21, 2021 LH. Then in the Display change the mode of the Leveling Head to Over slung (see chapter 4.2.3.1 Leveling). 2.7.1 INSIDE THE LEVELING HEAD The Leveling Head has a motor mounted in vertical that transmits the movement to an endless screw attached to the back of the Mitchell mount using a belt.
  • Page 35 S23’ Digital hand command 7021 1(1) Hand command for the crane. SERVICEVISION BIS SL Ríos Rosas, 20 · 08940 CORNELLA DE LLOBREGAT (Barcelona) Spain · Tel. 34 93 223 86 30 · Fax 34 93 223 86 31 comercial@servicevision.es ·...
  • Page 36 SCORPIO 23’ - PARTS AND COMPONENTS DESCRIPTION - Accessories Version 1.01 April 21, 2021 S23’ Portable display The Portable display allows the user to use the functions of the crane and also displays useful information for the user. S23’ Portable display cables Short cable for portable display.
  • Page 37 Hexagonal screw for column base DIN912 M16x40mm. 0081 6(6) Screw leveling head (DIN912 M8x35mm) SERVICEVISION BIS SL Ríos Rosas, 20 · 08940 CORNELLA DE LLOBREGAT (Barcelona) Spain · Tel. 34 93 223 86 30 · Fax 34 93 223 86 31 comercial@servicevision.es · www.servicevision.es...
  • Page 38 SCORPIO 23’ - PARTS AND COMPONENTS DESCRIPTION - Accessories Version 1.01 April 21, 2021 S23’ Set of tools 0069 13-13mm fix combined wrench ½’’ Ratchet wrench 0070 0089 24mm socket 2482 Allen key set 0203 Vise grip pliers 2442 MSH Bar for castle tool 0121 Big castle tool *The quantity detailed between brackets () is counted as spare.

  • Page 39: Check Before Flight

    Pan movement of the Arm. The leveling jacks needs to be touching the ground and the load inside the vehicle needs to be evenly distributed. SERVICEVISION BIS SL Ríos Rosas, 20 · 08940 CORNELLA DE LLOBREGAT (Barcelona) Spain · Tel. 34 93 223 86 30 · Fax 34 93 223 86 31 comercial@servicevision.es...
  • Page 40 SCORPIO 23’ - SET UP THE EQUIPMENT - Starting the crane Version 1.01 April 21, 2021 STARTING THE CRANE Procedure to set up the equipment in location once the crane has been removed from the transport vehicle and the shooting is being prepared: Use the leveling jacks to level the base of the arm.
  • Page 41 Now the crane is ready to use all the functions in it. SERVICEVISION BIS SL Ríos Rosas, 20 · 08940 CORNELLA DE LLOBREGAT (Barcelona) Spain · Tel. 34 93 223 86 30 · Fax 34 93 223 86 31 comercial@servicevision.es...
  • Page 42 SCORPIO 23’ - CONTROL DISPLAY INFORMATION - Starting the crane Version 1.01 April 21, 2021 CONTROL DISPLAY INFORMATION The following chapter describes the different screens showed when starting the crane: After pressing the START button in the electronic box and if all the securities are ready (Hand Command, Emergency stop.) screen 04.01 will appear.

  • Page 43: Main Screen

    Arm Limit ramps and the stop at any point the operator stops. SERVICEVISION BIS SL Ríos Rosas, 20 · 08940 CORNELLA DE LLOBREGAT (Barcelona) Spain · Tel. 34 93 223 86 30 · Fax 34 93 223 86 31 comercial@servicevision.es...

  • Page 44: Operation Menu

    SCORPIO 23’ - CONTROL DISPLAY INFORMATION - Operation menu Version 1.01 April 21, 2021 OPERATION MENU These are all the menus available through the MENU button. Each menu is described below. 04.07 Dropdown Menu Settings 1 04.08 Dropdown Menu Settings 2 04.06 Dropdown Menu 04.09 Dropdown Menu Settings 3 04.11 Dropdown Menu Auxiliary 2...
  • Page 45 Note: The maximum recording length of each memory can be 1 hour. 04.16 Recording memory. SERVICEVISION BIS SL Ríos Rosas, 20 · 08940 CORNELLA DE LLOBREGAT (Barcelona) Spain · Tel. 34 93 223 86 30 · Fax 34 93 223 86 31 comercial@servicevision.es ·...
  • Page 46 SCORPIO 23’ - CONTROL DISPLAY INFORMATION - Operation menu Version 1.01 April 21, 2021 4.2.2.2 PLAYBACK A MOVEMENT Once there is a memory recorded, the system allows different playing configurations to play/reproduce a recorded movement. To playback a movement as it was recorded, change the status mode of the ARM axis to [PLAY] or press the PLAY ALL button to change all the axes states to play.
  • Page 47 04.21 Lift Adjust menu. 04.22 Lift adjust panel. SERVICEVISION BIS SL Ríos Rosas, 20 · 08940 CORNELLA DE LLOBREGAT (Barcelona) Spain · Tel. 34 93 223 86 30 · Fax 34 93 223 86 31 comercial@servicevision.es ·...
  • Page 48 SCORPIO 23’ - CONTROL DISPLAY INFORMATION - Operation menu Version 1.01 April 21, 2021 4.2.3.4 RESET PAN The reset pan feature is used to set the 0º in the actual position of the crane. If the 0 position of the crane is not done, the position that the crane had when the system was started will be taken as the 0 position.
  • Page 49 SERVICEVISION BIS SL Ríos Rosas, 20 · 08940 CORNELLA DE LLOBREGAT (Barcelona) Spain · Tel. 34 93 223 86 30 · Fax 34 93 223 86 31 comercial@servicevision.es...

  • Page 50: Stop Sequence

    SCORPIO 23’ - CONTROL DISPLAY INFORMATION - Operation menu Version 1.01 April 21, 2021 4.2.3.7 STOP SEQUENCE This feature can be used to set different stop points for the telescopic movement. To start using it, extend the crane to the first desired stopping point and press the Add Point button.
  • Page 51 04.32 5 CWE Points in the length of the crane with an offset of 10% SERVICEVISION BIS SL Ríos Rosas, 20 · 08940 CORNELLA DE LLOBREGAT (Barcelona) Spain · Tel. 34 93 223 86 30 · Fax 34 93 223 86 31 comercial@servicevision.es...
  • Page 52 SCORPIO 23’ - CONTROL DISPLAY INFORMATION - Operation menu Version 1.01 April 21, 2021 4.2.3.10 HAND COMMAND (H.C.) BUTTONS The GREEN button is the main action button, below is detailed the different functions of this button depending on the screen shown in the display. GREEN Main menu Memories...
  • Page 53 04.35 Screen menu. 04.36 Night mode ON. SERVICEVISION BIS SL Ríos Rosas, 20 · 08940 CORNELLA DE LLOBREGAT (Barcelona) Spain · Tel. 34 93 223 86 30 · Fax 34 93 223 86 31 comercial@servicevision.es ·...

  • Page 54: Bus Connections

    SCORPIO 23’ - CONTROL DISPLAY INFORMATION - Operation menu Version 1.01 April 21, 2021 4.2.4 AUXILIARY 4.2.4.1 BUS CONNECTIONS In this menu everything connected to the CCU through the communication line will be displayed. Also, it is possible to see the Software version for each axis and, if the number of an axis is pressed, a screen will display more information referred to that axis.

  • Page 55: Level Adjust

    CCU have a reading for that potentiometer. 04.43 ADC Test. SERVICEVISION BIS SL Ríos Rosas, 20 · 08940 CORNELLA DE LLOBREGAT (Barcelona) Spain · Tel. 34 93 223 86 30 · Fax 34 93 223 86 31 comercial@servicevision.es...

  • Page 56: Default Configuration

    SCORPIO 23’ - CONTROL DISPLAY INFORMATION - Operation menu Version 1.01 April 21, 2021 4.2.4.6 ENCODERS Displays the readings of the encoders connected to the CCU. In case the encoder signal does not change when the controller is moved, there is a problem with that controller. 04.44 Encoders.

  • Page 57: Basic Safety Information

    MALFUNCTION RISKS Next there is a list of events related to the crane and the possible danger associated to the malfunction of each part. In the event any of the following occurs, contact Servicevision for the procedure to follow. SERVICEVISION BIS SL Ríos Rosas, 20 ·...
  • Page 58 POTENTIAL DANGERS FOR THE USER There are mechanical dangers to behold, but if the crane is operated with all protections, equipment covers and instructions received under both the user’s manual and the training given by Servicevision’s authorized trainee, it should be no danger.

  • Page 59: Mechanical Hazards

    Table of potential mechanical hazards associated in case the instructions are not followed is shown below. 5.3.1.1 MECHANICAL HAZARDS: These are the mechanical hazards that may arise in the case that the conditions and explanations given by Servicevision training personnel are not followed. Mechanical Hazards Associated to the Scorpio cranes Flattening/Crushing Shearing Cutting &...
  • Page 60 SCORPIO 23’ - SECURITIES & RECOMMENDATIONS - Protection systems Version 1.01 April 21, 2021 PROTECTION SYSTEMS 5.4.1 PROTECTION AGAINST OVERLOADS The Scorpio cranes have a cutting element against electrical overloads; the circuit breaker is located at the power input. It is a protection against electrical overload (and shortcuts) 16 A caliber and curve C.

  • Page 61: System Shutdown

    05.04 Hand command stop button. SERVICEVISION BIS SL Ríos Rosas, 20 · 08940 CORNELLA DE LLOBREGAT (Barcelona) Spain · Tel. 34 93 223 86 30 · Fax 34 93 223 86 31 comercial@servicevision.es...

  • Page 62: Maintenance And Service

    Each inspection will determinate the conditions of the equipment, and the parts or components that need repair or replacement. In case the user is not doing these inspections or is not following the recommendations of the technical personnel of Servicevision, Servicevision will not be responsible of any damage generate by the crane. MAINTENANCE REQUIREMENTS Any maintenance must be done only by personnel trained by Servicevision.
  • Page 63 Lubricate the aluminum wheels in case the existing lubricant is dirty or inexistent. SERVICEVISION BIS SL Ríos Rosas, 20 · 08940 CORNELLA DE LLOBREGAT (Barcelona) Spain · Tel. 34 93 223 86 30 · Fax 34 93 223 86 31 comercial@servicevision.es...
  • Page 64 SCORPIO 23’ - MAINTENANCE & SERVICE - General Maintenance Version 1.01 April 21, 2021 Normal shooting situation involving crashes, emergency full stops, sudden side tackles, etc. requires the following steps: • Check that the contacts between guides and wheels are in good condition without particles that might interfere with the correct functioning of the arm.
  • Page 65 06.08 First section end. 06.07 First section cable hold. SERVICEVISION BIS SL Ríos Rosas, 20 · 08940 CORNELLA DE LLOBREGAT (Barcelona) Spain · Tel. 34 93 223 86 30 · Fax 34 93 223 86 31 comercial@servicevision.es ·...

  • Page 66: Electronic Connectors

    4 screws holding the wheels. Then use the guide provided by Servicevision to press the wheels against the guide and tight the screws. Mount it back in and verify that the tension of the 06.11 Adjusting the cable trolleys.

  • Page 67: Electronic Boards

    CCU but there is one connector in the SERVOs also to connect the SD Card reader. To LOAD software in the boards, the software needs to be inside an SD Card. Servicevision will send to the users a new software every time it is developed. This software will be a file called “XXXX.bin”.
  • Page 68 SCORPIO 23’ - MAINTENANCE & SERVICE - Loading software to the SERVO/CCU Version 1.01 April 21, 2021 6.4.1 CCU SOFTWARE UPDATE The CCU controls all the functions that the head/crane can perform. There are two different kind of software for the CCU depending on if it is inside a crane or in a control for the head. To identify them, on the name of the file there is an H or a C depending on this (“CCU_C.v05.68xxxxx.bin”...
  • Page 69 It does not need to be adjusted; it is preset by the factory. SERVICEVISION BIS SL Ríos Rosas, 20 · 08940 CORNELLA DE LLOBREGAT (Barcelona) Spain · Tel. 34 93 223 86 30 · Fax 34 93 223 86 31 comercial@servicevision.es...
  • Page 70 SCORPIO 23’ - MAINTENANCE & SERVICE - Driver adjustment Version 1.01 April 21, 2021 6.5.2 LEVELING HEAD DRIVER There are different DIP switches on the PCB board, verify the configuration of those DIP switches with the following table for the LH driver: 2,3,4,7 ON 1,5,6,8,9,10 OFF 1,2,3 ON...
  • Page 71 SCORPIO 23’ - MAINTENANCE & SERVICE - Replacement of other components in the crane Version 1.01 April 21, 2021 REPLACEMENT OF OTHER COMPONENTS IN THE CRANE In the event the user needs to replace any other component of the crane, contact Servicevision for further instructions on how to do it. SERVICEVISION BIS SL Ríos Rosas, 20 ·...
  • Page 72 4.2.4.3 Level Adjust). One of the components of the Leveling Head is damaged. Use the The leveling head finds a Leveling Head in manual mode and contact Servicevision for repair different level every time the crane is started it. (see chapter 4.2.3.1 Leveling...
  • Page 73 (chapter faster in one direction than Command adjust 4.2.4.2). another SERVICEVISION BIS SL Ríos Rosas, 20 · 08940 CORNELLA DE LLOBREGAT (Barcelona) Spain · Tel. 34 93 223 86 30 · Fax 34 93 223 86 31 comercial@servicevision.es · www.servicevision.es...
  • Page 74 -Check if there is something stuck on the counterweights trolley LIMITS ALARM” -Check if the counterweight cable is properly connected. -Contact Servicevision for further troubleshooting. -Check if there is an ALARM in the main screen. If so, check if the counterweight chain is connected.
  • Page 75 The Leveling Head has no head in case the leveling head power cable is broken. SERVICEVISION BIS SL Ríos Rosas, 20 · 08940 CORNELLA DE LLOBREGAT (Barcelona) Spain · Tel. 34 93 223 86 30 · Fax 34 93 223 86 31 comercial@servicevision.es ·...

  • Page 76: Special Configurations

    EB to the FIZ Command connector in the back of the control of the Scorpio Head (fig.08.02). A standard communication cable from Servicevision (6pin XLR) can be used to extend the link from the control interface connector of the 08.02 Connectors to be linked.
  • Page 77 (fig. 08.07). 08.06b Focus track in settings. 08.07 Crane not detected ERROR. SERVICEVISION BIS SL Ríos Rosas, 20 · 08940 CORNELLA DE LLOBREGAT (Barcelona) Spain · Tel. 34 93 223 86 30 · Fax 34 93 223 86 31 comercial@servicevision.es ·...
  • Page 78 SCORPIO 23’ - SPECIAL CONFIGURATIONS - Interface with Scorpio Heads Version 1.01 April 21, 2021 8.1.3 BACK-PAN In a normal operation mode, the remote head holds always the same position respect the crane. This means that if the arm of the crane swings left or right, the remote head will change the perspective of the camera by the same number of degrees that the arm has swinged in order to maintain the same position respect the crane (fig.
  • Page 79 SERVICEVISION BIS SL Ríos Rosas, 20 · 08940 CORNELLA DE LLOBREGAT (Barcelona) Spain · Tel. 34 93 223 86 30 · Fax 34 93 223 86 31 comercial@servicevision.es...
  • Page 80 SCORPIO 23’ - SPECIAL CONFIGURATIONS - Interface with Scorpio Heads Version 1.01 April 21, 2021 direction. If there is a shortcut to the M.G., just by short pressing the shortcut the keypad will be opened to introduce the distance. If the shortcut is long pressed, it will open the M.G. menu. DISTANCE BY FOCUS M If there is a Scorpio Focus connected to the system, it is possible to introduce lens points in the →...
  • Page 81 0.20cm (7.8inches). SERVICEVISION BIS SL Ríos Rosas, 20 · 08940 CORNELLA DE LLOBREGAT (Barcelona) Spain · Tel. 34 93 223 86 30 · Fax 34 93 223 86 31 comercial@servicevision.es...
  • Page 82 SCORPIO 23’ - SPECIAL CONFIGURATIONS - Interface with Scorpio Heads Version 1.01 April 21, 2021 8.1.6 FOCUS TRACKING The focus tracking is a function that keeps the focal distance at the same point regardless the movement of the crane. The different modes are: TRACK CRANE, CINETAPE and CINETAPE M. To use any of these functions, a Scorpio Focus must be connected to the system by wire and the lens marks must be pre-introduced into the system.

  • Page 83: Matrix Mode

    08.28 will be displayed. Ensure that both controls have this 08.28 Start recording screen. screen displayed before pressing the start button. SERVICEVISION BIS SL Ríos Rosas, 20 · 08940 CORNELLA DE LLOBREGAT (Barcelona) Spain · Tel. 34 93 223 86 30 · Fax 34 93 223 86 31 comercial@servicevision.es ·...

  • Page 84: Analog Trigger

    SCORPIO 23’ - SPECIAL CONFIGURATIONS - Record memories crane-head Version 1.01 April 21, 2021 8.3.2 ANALOG TRIGGER Head control Crane electronic box Analog trigger To start the memories of the head and the crane at the same time 08.29 Analog memory trigger (Ref. with the analog hand command, the adaptor cable (Ref.
  • Page 85 AUGMENTED REALLITY Servicevision products are equipped with encoder output connectors. From those connectors it is possible to read the number of pulses and with the encoder resolution and the gear factors provided in the documentation chapter of the manuals it is possible to have an accurate reading of the movement of the cranes and heads.
  • Page 86 SCORPIO 23’ - DOCUMENTATION - PINOUTS Version 1.01 April 21, 2021 DOCUMENTATION PINOUTS Connectors in the Electronic Box: AC Power out for P.U. (BURNDY 4 pins female panel Encoder travelling red (LEMO 10 pin female panel EGG -2B.310.CYM) UT100-104 ST) 1 VCC (Red) 1 220/110 V PHASE (Blue) 2 GROUND (Black)
  • Page 87 24 B+ TRACK CRANE (White) 25 B- TRACK CRANE (Brown) 26 NC 27 NC SERVICEVISION BIS SL Ríos Rosas, 20 · 08940 CORNELLA DE LLOBREGAT (Barcelona) Spain · Tel. 34 93 223 86 30 · Fax 34 93 223 86 31 comercial@servicevision.es ·...

  • Page 88: Other Documentation

    SCORPIO 23’ - DOCUMENTATION - Other documentation Version 1.01 April 21, 2021 OTHER DOCUMENTATION ENCODER OUTPUT RESOLUTION & PINOUT FOR S23’ E2 ENCODERS Encoder A/B phase: 90º Z output: not available TILT & PAN: Encoder Resolution: 19000 points Gear factors: 202:12 Encoder output resolution: (202 / 12) x 19000 = 319833.3333 points/turn or 888.4259 points/deg ARM: Encoder resolution: 1000 points Motor turns: 101...
  • Page 89 4. If the reading is by level needs to be multiplied by 2. SERVICEVISION BIS SL Ríos Rosas, 20 · 08940 CORNELLA DE LLOBREGAT (Barcelona) Spain · Tel. 34 93 223 86 30 · Fax 34 93 223 86 31 comercial@servicevision.es...
  • Page 90 SCORPIO 23’ - DOCUMENTATION - Other documentation Version 1.01 April 21, 2021 CCU/SERVO DIP SWITCH CONFIGURATIONS *DIP switch configuration at date 05/10/2020...
  • Page 91 SCORPIO 23’ - DOCUMENTATION - Other documentation Version 1.01 April 21, 2021 DRAWINGS SERVICEVISION BIS SL Ríos Rosas, 20 · 08940 CORNELLA DE LLOBREGAT (Barcelona) Spain · Tel. 34 93 223 86 30 · Fax 34 93 223 86 31 comercial@servicevision.es ·...
  • Page 92 SCORPIO 23’ - DOCUMENTATION - Other documentation Version 1.01 April 21, 2021...
  • Page 93 Service vision keeps the right to change or modify any specifications of the equipment or any information regarding the equipment without being specified in this manual. SERVICEVISION BIS SL Ríos Rosas, 20 · 08940 CORNELLA DE LLOBREGAT (Barcelona) Spain · Tel. 34 93 223 86 30 · Fax 34 93 223 86 31 comercial@servicevision.es...

Table of Contents