Page 4
( QTY = G ap beTween floor and end panel #94-132 5/16" Plusnut Spacer 4× 4× 0.375" ID, × 1.0" OD × 0.25" LONG # 98-157 NYLON S3-RA36-3 Installation Guide | REV. B1 | Page 4 For technical support, contact us at 1-800-565-5321...
1/2" Socket HARDWARE USED 4× hand tighten the bolts #90-204 Hex Bolt 5/16" × 3/4" #98-116 Flat Washer #94-116 Serrated Nut BRACKET HEAD S3-RA36-3 Installation Guide | REV. B1 | Page 7 For technical support, contact us at 1-800-565-5321...
Page 8
TOOLS q Marker MARK Mark 2 holes of each end panel on the vehicle floor. TOOLS q Marker MARK S3-RA36-3 Installation Guide | REV. B1 | Page 8 For technical support, contact us at 1-800-565-5321...
Page 9
1/2" Drill Bit w/ Drill Collar ( Set at 1/2" ) q Plus Nut Tool ( 5/16" ) HARDWARE USED 8× #94-132 Plus Nut DRILL COLLAR 1/2" ) seT aT S3-RA36-3 Installation Guide | REV. B1 | Page 9 For technical support, contact us at 1-800-565-5321...
Page 10
1/2" socket until the plusnut locks, then remove the bolt by turning the impact in reverse. FORWARD REVERSE S3-RA36-3 Installation Guide | REV. B1 | Page 10 For technical support, contact us at 1-800-565-5321...
Page 11
( QTY = G ap beTween floor and end panel #94-132 5/16" Plusnut most vehicle use spacer when not over ribs W/ Spacer W/O Spacer S3-RA36-3 Installation Guide | REV. B1 | Page 11 For technical support, contact us at 1-800-565-5321...
Cordless Impact q 1/2" Socket HARDWARE USED 4× #90-212 Hex Bolt 5/16" × 1-1/4" #98-122 Lock Washer #98-116 Flat Washer #94-132 5/16" Plusnut S3-RA36-3 Installation Guide | REV. B1 | Page 12 For technical support, contact us at 1-800-565-5321...
Page 13
“You have successfully installed your S3-RA36-3 Thank you for doing business with us.” cs@rangerdesign.com For any feedback or suggestions you may have, please contact: S3-RA36-3 Installation Guide | REV. B1 | Page 13 For technical support, contact us at 1-800-565-5321...