Keypad Instructions - Whirlpool WMCS7022PW Series Use & Care Manual

Keypad
Timer
(Hold to Set Clock)
Timer
(Hold to Set Clock)
START
+30 sec
START
+30 sec
CANCEL
CANCEL
Hold to Lock
1 min-6 min
Cook Time

Keypad Instructions

Feature
Hold to Set the Clock
Set Kitchen Timer
Add 30 Seconds
Start Function
Microwave Oven Cancel
Activate Control Lock
Quick Start
Set Manual Cooking
Instructions
To set the clock, follow the instructions below:
1. Press Timer for 3 seconds to enter clock setting.
2. Press the +/- button to set the hour, press START button to
confirm.
3. Press the +/- button to set the minute.
4. Press START button.
NOTE: The microwave oven must be in standby. It will also appear
every time the product is plugged into the power source, or power is
back after a power fail.
NOTE: When plug in, the screen shows"12Hr" ( "12" flashing), use
+/- to change 12 or 24 hour format, press START to confirm; then the
screen shows "12:00".
The kitchen timer functions like a stop watch. To set the kitchen
timer, following the instructions below:
1. Press Timer button.
2. Press +/- button to enter desired time.
3. Press START button.
NOTE: While the Timer countdown is active in the display, touch
CANCEL to cancel the Timer. The timer does not start or stop the
microwave oven.
The button START can be used in two ways:
1. To start the microwave by cooking for 30 seconds with full power
in standby mode.
2. To increase a cooking time using increments of 30 seconds. Each
press adds 30 seconds.
Press the START button to start any cooking function. If cooking is
interrupted by opening the door, touch the START button after the
door is closed again to resume the cycle.
The CANCEL button stops any microwave oven function except for
the clock and control lock.
The microwave oven will also turn off when the door is opened.
When the door is opened, the element(s) will turn off, but the
microwave oven light will remain on. Close the door and touch the
START button to resume the preset cycle.
Activate Control Lock to avoid an unintended start.
To activate, press and hold the CANCEL button for 3 seconds until
the CONTROL LOCKED icon appears on the display.
Repeat to unlock control.
Default power is FULL in this function (P100).
"Press 1 min, 2 min... or 6 min to start with the time mentioned on the
button."
Press "Cook Time" button to set manual cooking time. The default
power level is 100%. Press +/- button / 1 minute-6 minutes to set the
cooking time, follow the instructions below:
1. Press "Cook Time" button, "0:15" will show on the display.
2. Press +/- button / 1 min-6 min to adjust the cooking time.
3. Press START button to start.
NOTE: Press the "Power" button to increase/decrease power levels
in cyclic way P10 P20 P30...........P100.
7