Panasonic TC-L32X1 Operating Instructions Manual page 16

First Time Setup
(Continued)
Auto channel setup
Select "ANTICable setup"
next
i]select
16
• Press to exit from
a menu screen
EXIT
® To change setting
(Language/Clock/
Auto program/Input
labels) later, go to
Menu screen
(p.30)
_2)Select "ANT in"
FA_TTnq
Cable: Cable TV
Antenna: Antenna
Not used: Skip TV tuning ÷ go to O
Select "Not used" when no wire is connected to the "Antenna/Cable" terminal.
@ Typical when Cable/Satellite box is connected to a TV input.
@ Prevents accidental tuning to an unavailable signal.
_3_Select "Auto ram"
next
@ Select
C_select
mode
(ALL channels/Analog only/Digital only)
)ok
.@
0]select
Start scanning the channels
@ Available channels (analog/digital) are automatically set.
All channels: Scans digital and analog channels
Analog only: Scans Analog channels only
Digital only: Scans Digital channels only
@ Confirm registered channels
@ If OK is not pressed after selecting "Apply", the channels will not be saved.
The channel will be saved when no operation is performed for 60 seconds and the "Manual
program" menu will also exit automatically.
@ If you perform scanning more than twice, previously saved channels are erased.
Set the Input labels
Label: [BLANK] SKIP/VCR/DVD/
next CABLE/SATELLITE/DVR/GAME/
AUX/RECEIVER/COMPUTE R/
Blu-ray/CAMERA/DVD REC/
0_select HOME THTR/MONITOR/MEDIA
CTR/MEDIA EXT/OTHER
select
)set
or
R_m
HDm
B
(example: TC-L37X1)
PC
Switches Input mode alphabet to
numeric