Table of Contents
Advertisement
Disc link
Enlace de discos
Editing with only desired
tracks
Example:
Recording only desired tracks from four
discs on a C-46 tape.
Edit recording of the first disc
_
1 Prepare the cassette deck.
Perform step 1 on page 30.
2 Program the desired tracks in
order.
Perform steps 1 and 2 on page 18.
3 Press TAPE LENGTH and specify
the length of the tape (C-46).
4 Press DISC LINK.
5 Adjust the recording level.
Perform steps 3 and 4 on page 30.
6 Press ► PLAY to start recording.
If the cassette deck has no SYNCHRO
EDIT terminal, see page 32.
Recorded contents of tape: D
Edit recording of the second disc
1 Insert the new disc.
2 Erase the programmed tracks on
both sides A and B.
© Press CLEAR until the track number
displayed is 0.
©
Press SIDE A/B to switch to side B.
® Press CLEAR until the track number
displayed is 0.
@ Press SIDE A/B to switch ;o side A.
3 Program the desired tracks in
order.
4 Adjust the recording level.
5 Press ► PLAY to start recording.
Recorded contents of tape: ED
Edit recording of the third disc
1 Insert the new disc.
2 Erase the programmed tracks on
side B.
3 Program the desired tracks in
order.
4 Adjust the recording level.
5 Press ► PLAY to start recording.
Recorded contents of tape; B
< 3 >
Edit recording of the fourth disc
The procedure Is the same as that for the
third disc.
Recorded contents of tape: ID
To cancel CD edit mode:
Press ■ STOP.
Notes
•When a new disc Is inserted close to the
end of side A of the tape and the time
remaining on side A is shorter than the
next track, advance the tape to the begin¬
ning of side B and begin recording again.
•The
cassette
deck
which
has
no
SYNCHRO EDIT terminal continues to ad¬
vance the tape even after disc playback
has ended. Don't forget to stop the tape
and rewind it to the point where recording
ended.
•if the cassette deck is not equipped with an
auto reverse mode, change the tape over
to side B when the recording on side A is
finished.
Edicion de las melodias
deseadas solamente
Ejempio:
~
Grabacidn de las melodias deseadas de
cuatro discos en una cinta C-46.
Grabacidn con edicion del primer
disco
1 Prepare la platina de casete.
Realice el paso 1 de la pdgina 30.
2 Programe las melodias deseadas
en orden.
Realice los pasos 1 y 2 de la pdgina 18.
3 Pulse TAPE LENGTH y espe-
ciflque la duracldn de la clnta
(C-46).
4 Pulse DISC LINK.
5 Ajuste el nlvel de grabacidn.
Realice los pasos 3 y 4 de la pdgina 30.
6 Pulse ► PLAY para Inlciar la gra¬
bacidn.
Si la platina no tiene terminal SYNCHRO
EDIT, consulte la pdgina 32.
Contenldo grabado en la cinta:
El
Grabacidn con edicidn del segundo
disco
1 Inserte el nuevo disco.
2 Borre las melodias programadas
para los (ados A y B.
© Pulse CLEAR hasta que el numero de
melodfa visuaiizado sea 0.
© Pulse SIDE A/B para cambiar al (ado
B.
© Pulse CLEAR hasta que el ndmero de
melodfa visuaiizado sea 0.
®
Pulse SIDE A/B para cambiar ai iado
A.
3 Programe las melodias deseadas
en orden.
4 Ajuste el nlvel de grabacidn.
5 Pulse ► PLAY para inlciar la gra¬
bacidn.
Contenldo grabado en la cinta:
ID
Advertisement
Table of Contents
