Subscribe to Our Youtube Channel
Summary of Contents for Powered Aire AERO CONNECT
- Page 1 AERO CONNECT PERATING AND AINTENANCE ANUAL OWERED 109 M ORTENSEN , PA 16125 REENVILLE V10302023 Contact Powered Aire at: www.PoweredAire.com • TechnicalService@PoweredAire.com • 1-888-321-2473...
-
Page 2: Contact Information
CAUTION: Before aWemp8ng any installa8on, ensure that AERO air curtain (being a power supply source for this controller) is disconnected from electric power supply. Connect the AERO Connect to the air curtain by using the supplied wiring diagram located in the packing slip. -
Page 3: Schedule Settings
5. DISPLAY The display of the Aero Connect consists of the following Aero elements Note: Some of the display elements are not in use for Aero Air Curtains. Table below show only elements specific for Aero Connect system. Heating mode indicator... -
Page 4: Programming Advanced Settings
7. PROGRAMMING ADVANCED SETTINGS • With AERO Connect wired and powered correctly, hold power buWons for 3 seconds to turn off controller • Hold Fan buWon for 5 seconds to enter advanced sefngs programming mode A&B OR hold Set buWon for 5 seconds to ender advanced sefngs programming mode C •... -
Page 5: Technical Specifications
6,000 ft AMSL Limitation Altitude Temperature Sensor Type NTC, 10 kΩ @ 77 °F (25 °C) Dimension 3-3/8” x 3-3/8” x 1-7/8” Temperature Measurements ±0.9 F (±0.5 °C) Weight 5.3 oz Precision V10302023 Contact Powered Aire at: www.PoweredAire.com • TechnicalService@PoweredAire.com • 1-888-321-2473...
Need help?
Do you have a question about the AERO CONNECT and is the answer not in the manual?
Questions and answers