Table of Contents
Advertisement
MP3 MODE (USB/TF):
Whenever a USB drive or TF card are inserted
into the unit, it will automatically revert to the
corresponding mode and start reproducing music
from the connected device.
When operating in USB or TF mode:
•
Short press the PLAY/PAUSE button to play
and pause the music;
•
Press the Mode button to switch to Bluetooth
mode;
•
Whilst the music is playing:
- Short-press the NEXT button to move to the
next track.
- Short-press the PREVIOUS button to move to
the previous track.
AUX MODE:
To use AUX mode, start by inserting the included
AUX cable into the corresponding jack on the unit's
control panel.
Press the Mode button to change to AUX mode.
When operating in AUX mode:
•
Short press the Play/Pause button to play and
pause the music.
•
Press the Mode button to switch to Bluetooth
mode.
NOTE: The Previous Track/Next Track functions are
not available on AUX mode. Use the source device
to skip to the previous or next track when using this
mode.
HANDS-FREE CALLING:
This unit allows for hands-free calling when in
Bluetooth mode.
When using the hands-free calling function:
•
Short press the PLAY/PAUSE button to answer
a call.
•
Short-press this button again while in a call to
hang up.
•
Long-press this button to reject the call.
•
Double-click this button to redial the last dialled
number.
VOLUME CONTROL:
To control playback volume on any mode:
•
Long-press the NEXT button to increase the
sound output;
•
Long-press the PREVIOUS button to decrease
the sound output.
8
LIGHT EFFECT CONTROL:
This unit is equipped with a changeable LED effect.
Short-press the Power On/Off button while the unit
is on to cycle through and select the available LED
colours, in the following order:
1.
Blue,
2.
Green,
3.
Red,
4.
Orange,
5.
Light Blue,
6.
Automatic colour-changing cycle
7.
Lights OFF
Short-press this button again at any time to change
to a different colour.
TWS FUNCTION:
1.
Prepare the two speakers by entering both
speakers into Bluetooth mode.
2.
Press and hold the Mode button of one speaker
and it will automatically search for the other
speaker.
3.
Once successfully paired an audio signal will
be heard.
4.
The speakers will search for an existing
Bluetooth connection, alternatively connect a
new device via Bluetooth.
5.
Press and hold the Mode button of one speaker
to disconnect TWS mode.
6.
Whilst in TWS mode, both speakers are
controlled simultaneously
Advertisement
Table of Contents
