Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for CAME-TV NANO
- Page 1 USER MANUAL...
- Page 2 Suggestions for optimal use When you receive NANO, please charge it before turning it on. Make sure the devices are in off state while charging to prevent battery draining when fully charged.
- Page 3 Parameters CAME-NANO Parameters Standard DECT technology, GAP compatible 1100 ft. radius at Master in the open air Working Distance Working Time Master 8 Hours // Remote 15 Hours Channel Bandwidth 1.728MHz Modulation Type GFSK Duplex Operation Time Division Duplex (TDD) CE Frequency 1881.792-1897.344 MHz...
-
Page 4: Product Structure
Product Structure CAME-NANO The Master buttons are in red with the letter “M”, while the Remote buttons are in white without letters. REMOTE MASTER Microphone Volume Up Mute On / Off Volume Down Type-C Charging Port 3.5mm Audio Jack Power Switch /... - Page 5 CAME-NANO Power Switch / Working Lanyard Hole Back Clip Speaker State LED Indicator High battery level Green Medium battery level Yellow Low battery level Mute on Flashing Mute off Solid Charging Flashing in colours Fully charged Turn off automatically Connected / unpaired...
- Page 6 Person Team Max Distance 2200ft 1100ft(350m) 1100ft(350m) Master A...
- Page 7 Pairing Diagram CAME-NANO Master Remote B C J K...
- Page 8 Person Team Max Distance 2200ft Master A 1100ft(350m) 1100ft(350m)
- Page 9 Pairing Diagram CAME-NANO Remote Master Remote Master D E F Remote G H I Master...
- Page 10 Max Distance 3300ft Person Team 1100ft(350m) 1100ft(350m) Master A 1100ft(350m) 1100ft(350m)
- Page 11 Pairing Diagram CAME-NANO Remote Master R B C J Remote Master D E F Remote Master G H I...
- Page 12 8 Person Team CAME-NANO 8 Person Talking in One Group or Split into Two Groups (Each Group Five Person) Master A Master A 3.5mm Audio Cable ( Make sure connect with two different groups )
- Page 13 20 Person Team CAME-NANO Expanding to 20 Person Talking or Split into 2/3/4 Different Groups Master A Master A 3.5mm Audio Cable ( Make sure connect with two different groups )
- Page 14 Each Master within the Hub can accommodate up to 3 Remotes. With this configuration, a single hub enables connections for up to 10 NANO within a single system, while two hubs can facilitate connections for up to 15 NANO. (Please refer to the pairing diagram above for further guidance.) The hub has a micro USB port to power/charge the unit via 5V DC with a USB power supply or power bank.
-
Page 15: Product Details
Product details CAME-NANO Remote Working indicator for M1 group Working indicator for HUB remote Working indicator for M2 group Master 1 button Remote button Master 2 button Power indicator Charging indicator Charging indicator Battery compartment... -
Page 16: Battery Compartment
Battery Compartment CAME-NANO As long as an NB-6L battery is present in the battery compartment, it will constantly supply power to the hub. If there is no battery, the hub can also be connected to an external power supply through the USB port. -
Page 17: Pairing Instructions
Master until the green LED indicator begins flashing quickly and the sound of "pairing" is heard, indicating it has entered the pairing state. And then activate the pairing mode of remote Nano, it follows the same pairing activation steps by simultaneously pressing the volume up and down buttons. - Page 18 Nano with Hub Pairing Instructions CAME-NANO These are precise pairing procedures. It is strongly recommended to follow the guide carefully and accurately for successful operation of this unit. Pairing The product comes pre-paired, allowing immediate use upon switching on the device without any additional steps.
- Page 19 "pairing" is heard, indicating it has entered the pairing state. And then activate the pairing mode of lost remote Nano. Start by pairing one remote, once it says “your headset is connected” then proceed to pair the remaining lost remotes one by one in sequence.
- Page 20 Simultaneously press the "Volume Up" and "Volume Down" buttons on the disconnected remote Nano until the LED starts flashing quickly, you will hear the sound of pairing from the remote. Begin by pairing one remote first, then proceed to pair the remaining lost remotes one by one in sequence.
- Page 21 **NOTES** CAME-NANO 1 The Master module and remote module in the hub cannot be paired at the same time, as it may result in malfunction. 2 It is crucial to identify the group that the disconnected remote belongs to before pairing.
-
Page 22: Fcc Regulatory Compliance
FCC Regulatory Compliance CAME-NANO If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. -
Page 23: Aftersales Services
Aftersales Services CAME-NANO While we trust you will never have the need, if you do,our service is both friendly and hassle-free. Email: Americas: americas@came-tv. com Outside Americas: europe@came-tv.com Follow Us: https://www.facebook.com/CameTvGear/ https://www.instagram.com/cametv/ https://www.youtube.com/c/CameTVgear/videos https://www.twitter.com/CameTV...