目錄 BLUETOOTH MICROPHONE TRANSMITTER FEATURES BASIC SETUP POWER ON / OFF WEARING INSTRUCTIONS CHARGING INSTRUCTIONS MODES AND VOLUME INDICATOR LIGHT USER SUPPORT TROUBLESHOOTING LEGAL INFORMATION SPECIFICATION...
BLUETOOTH MICROPHONE TRANSMITTER Bluetooth microphone transmitter ( also called transmitter ) can receive long-distance sound trans- mission to the hearing aid (placed within 8m from the hearing aid). Example: Put the Bluetooth micro- phone transmitter next to the TV to transmit the sound from the TV to the hearing aid, or hang the Bluetooth microphone transmitter on the speaker to transmit the distant sound to the hearing aid, giving...
FEATURES Microphones Mode Volume(+) Back Clip Power ON / OFF Volume(-) Charging Indicator Port Light POWER ON / OFF ● Power ON: Slide the ON/OFF switch to the ON position. ● Power OFF: Slide the ON/OFF switch to the OFF position.
WEARING INSTRUCTIONS The microphone can be worn on the collar of the call partner to receive the spoken voice and transmit it to T3 hearing aid, so that the hearing-impaired can obtain a clearer hearing experience. It can also be used for watching TV, meeting, listen- ing to performances...
● Transmitter: Flashing Red: Charging Solid Red: Charging Complete Notice ※ Avoid charging in high temperature environment. ※ With the increase of charging and discharging times, the battery will gradually age. It is recom mended to replace the battery every two years. Please contact the dealer and do not replace it by yourself.
Page 8
There are 2 modes to the Transmitter, to switch between the 2 modes press the button M on the Transmitter. Turn the switch to ON to turn on the transmitter. After it is turned on, it will automatically connect to T3 hearing aid.
Page 9
● Mode 1: Assistive Listening Mode: There are three levels of volume in Assistive Listening Mode, operated as follows: Button : Decrease the volume Button : Increase the volume Button : Enter microphone mode, at this time blue light is on, and the headphone audio is sent from the microphone transmitter to the headphone.
INDICATOR LIGHT Transmitter Light Charging Flashing Red Charging complete Solid Red Not connected T3 Flash Blue quickly Auto-connected T3 Flash Blue slowly Mic-on mode Solid Blue Mic-off mode Flash Blue showly About to power-off Flashing Red...
USER SUPPORT TROUBLESHOOTING For any reason, do not service your transmitter yourself, that can easily cause more damage to the transmitter. Refer to troubleshooting when your transmitter is unusable or unusual. If the troublehsooting doesn’t solve your problem, please contact initial point of purchase or our customer service team at: www.digisineproducts.com www.mimitakarahealth.com...
LEGAL INFORMATION Federal Communications Commission (FCC) State- ment 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Page 13
If this equipment does cause harmful interference to radio or television reception, which can be deter- mined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna.
Page 14
FCC RF Radiation Exposure Statement: 1. This Transmitter must not be co-located or operat- ing in conjunction with any other antenna or trans- mitter. 2. For portable operation, this device has been tested and meets FCC RF exposure guidelines. When used with an accessory that contains metal may not ensure compliance with FCC RF exposure guidelines.
SPECIFICATION Model UP-6KNX Dimensions 4.47 x 1.4 x 3.3 cm Weight 30±5 g / pcs Color White / Black Power Type-C ; 3.7V 230mA Charging time 2 Hours Continuous Use 8 Hours Bluetooth 8 meters distance...
Need help?
Do you have a question about the 6EN and is the answer not in the manual?
Questions and answers