ViewSonic ViewPanel VG151 User Manual page 8

Do the following to adjust the screen image:
1 To display the Main Menu, press button [1].
All OnView menus and adjustment screens disappear automatically after
NOTE:
about 15 seconds. This time period is adjustable through the Setup menu and the
OSD timeout control described on page 11.
To highlight a control you want to adjust, press
2
Main Menu.
3 To select the highlighted control, press button [2]. A control screen appears like
the one shown below for the selected control.
4 To adjust the selected control, press the up
Control Panel of the monitor.
5 To save the adjustments and exit the menu, press button [1] twice.
The following tips may help you optimize your display:
• Adjust your computer's graphic card so that it outputs a video signal 1024 x 768
@ 60Hz to the VG151. (Look for instructions on "changing the refresh rate" in
your graphic card's user guide.)
• If necessary, make small adjustments using H POSITION and V POSITION until
the screen image is completely visible. (The black border around the edge of the
screen should barely touch the illuminated "active area" of the ViewPanel
• Adjust FINE TUNE so that the screen image looks focused, crisp, and sharp.
Auto Image Adjust and Manual Image adjust are inactive for digital mode.
NOTE:
or to scroll up or down the


or down buttons on the Front


ViewSonic
® .)
VG151 7