Table of Contents
Advertisement
en Rapid heating
Directly selecting types of heating
You can select certain types of heating directly using a
touch field.
Press the touch field for the required type of heat-
1.
ing.
Available types of heating with direct selection:
– 4D hot air
– Top/bottom heating
a The temperature is highlighted in white.
Use the control ring to set the temperature.
2.
Press
to start.
3.
a The appliance starts heating.
9 Rapid heating
To save time, you can shorten the preheating time for
set temperatures of 100 °C and higher.
You can use rapid heating for the following types of
heating:
¡ 4D hot air
¡ Top/bottom heating
9.1 Setting rapid heating
To ensure an even cooking result, do not place the
food in the cooking compartment until rapid heating
has come to an end.
Note: Do not set a cooking time until rapid heating has
come to an end.
10 Time-setting options
Your appliance has different time-setting options, with
which you can control its operation.
10.1 Overview of the time-setting options
You can set a cooking time and end time for the opera-
tion. The timer can be set independently of the appli-
ance when it is in operation.
Time-setting
Use
option
Timer
The timer can be set independently
of the appliance when it is in opera-
tion. It does not affect the appliance.
Cooking time
If you set a cooking time for the op-
eration, operation of the appliance
stops automatically once this time
has elapsed.
End
For the cooking time, you can set the
time at which operation ends. The
appliance starts up automatically so
that it finishes cooking at the re-
quired time.
12
a The target temperature, the time and how long the
appliance has already been in operation are shown
in the display.
8.7 Displaying information
In most cases, you can call up information about the
function that you have just started. The appliance dis-
plays some information, e.g. to ask you to do/confirm
something or to issue a warning, automatically.
Press .
1.
a If available, information is displayed for a few
seconds.
Use the control ring to scroll through longer pas-
2.
sages of text.
Set a suitable type of heating and a temperature of
1.
at least 100 °C.
Press
.
2.
a The symbol lights up red.
Press
to start.
3.
a Rapid heating starts.
a When rapid heating has come to an end, an audible
signal sounds. The red symbol goes out.
Place the food in the cooking compartment.
4.
Cancelling rapid heating
Press
.
▶
a The red symbol goes out.
10.2 Setting the timer
The timer runs independently of the appliance when it
is in operation. The timer can be set when the appli-
ance is switched on or off, up to 23 hours and 59
minutes. The timer has its own audible signal so that
you can tell whether it is the timer or a cooking time
which has elapsed.
Press .
1.
a The symbol lights up red.
Use the control ring to set the timer duration.
2.
Press
to start the timer.
3.
The timer starts automatically after a few seconds.
a The timer counts down.
a When the appliance is switched off, you will still be
able to see the timer counting down in the display.
a When the appliance is switched on, the display
shows the settings for the current operation. To dis-
play the timer for a few seconds, press .
a An audible signal sounds once the timer duration
has elapsed. The red symbol goes out.
Once the timer duration has elapsed:
4.
To stop the signal early, press any touch field.
‒
To set another timer, press
‒
ring to set the time.
Changing the timer
You can change the timer duration at any time.
and use the control
Advertisement
Table of Contents
