Advertisement
fire, especially if the appliance touches the walls of
the garage or the door touches the unit as it closes.
FOR HOUSEHOLD USE ONLY
SAVE THESE INSTRUCTIONS
NOTICE
This appliance has a polarized plug (one blade is wider than
the other). As a safety feature, this plug will fit in a polarized
outlet only one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified
electrician. Do not attempt to defeat this safety feature.
INTRODUCTION
Congratulations! You now have a can opener you'll be
proud to display on your kitchen counter. This very con-
temporary Cuisinart
stainless steel, with smooth lines and an extra-wide base.
Good looking, and almost impossible to tip, it requires
only a quick press of the lever to operate. Opening cans
has never been easier.
OPERATING INSTRUCTIONS
1. Plug cord into outlet.
2. Raise can opener lever.
3. Position the can under the guiding
posts and lower the lever, making sure
the Power Cut
inside the rim of the can.Note: Be sure
the lever is inserted all the way.
4. Once the Power Cut
can, cutting begins. There is
no need to hold the lever down
during cutting.
5. Cutting action will automatically stop,
once can is completely open.
6. Can will remain in position until lever is
lifted.
7. To remove can, hold can firmly with one
hand while lifting lever with the other.
8. Carefully remove lid from magnet.
Can Opener is constructed of sturdy
®
blade is positioned
®
blade pierces the
®
1
2
3
4
Advertisement
