Table of Contents
Advertisement
Quick Links
The following guide is intended as an overview of your Aurender's hardware
interface. Detailed installation information is found in the included
Quick Start Guide
and a comprehensive Conductor App Overview and How-To guides are found in the
Aurender Knowledge
Base.
Box Contents
• Aurender N100
• AC Power Cord
• Quick Start Guide
Not included: An iOS (iPad or iPhone) or Android device is required to interface with
and control your Aurender. The Aurender must be connected to a Local Area
Network (LAN) via Ethernet (CAT5 or higher) in order to facilitate communication
between your remote device and the Aurender. Please review the "Connect to Local
Area Network (LAN)" section of the included
Quick Start Guide
for more information
on network connectivity.
Digital Transport
This model is a high performance digital audio transport. It features digital outputs
only - there are no analog outputs on board this model. Pair this model up with a
high performance Digital-to-Analog Converter (DAC) for a complete digital front end
solution.
DAC Compatibility
Advertisement
Table of Contents
Summary of Contents for audiophile Aurender N100
- Page 1 Conductor App Overview and How-To guides are found in the Aurender Knowledge Base. Box Contents • Aurender N100 • AC Power Cord • Quick Start Guide Not included: An iOS (iPad or iPhone) or Android device is required to interface with and control your Aurender.
- Page 2 AES/EBU and SPDIF outputs & inputs are universally compatible. However, with USB, compatibility between any two devices is not always guaranteed! Sometimes, special drivers or software provisions must be made to establish compatibility over USB. DACs that fully adhere to the USB Audio Class 2 (UAC2) protocol will be supported without issue.
- Page 3 Press the Display Menu button to cycle through various display options including Song Information, Level Meters, and Playlist Menu. Playlists may be selected and played using the four buttons on the right side of the front panel display. Use the Previous (5) and Next (6) buttons to scroll between playlists.
- Page 4 The Aurender must be connected to your Local Area Network via Ethernet (CAT5 or higher). In case there is no Ethernet connection available in the location where your Aurender is to be installed, please see the following support article for other options: What if I do not have an Ethernet/LAN connection in my listening room? 3.
- Page 5 File Type & Resolution Support View a comparison table of file type and sample rate support by model and output/input here Positioning • Place your device on a flat and stable surface. • Keep away from heat sources, such as radiators. •...
- Page 6 • All devices should be turned off before making any power cables or analog/digital interconnections. • Only plug your Aurender into grounded plugs and grounded sockets. • Do not drop the device to avoid internal damage. • Do not disassemble the device. Doing so may cause inadvertent damage that would not be covered under warranty.
Need help?
Do you have a question about the Aurender N100 and is the answer not in the manual?
Questions and answers