Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Bridgestone webfleet PRO i
- Page 1 PRO i Installation Guide 1684567848876 - Draft - 2023-07-13...
-
Page 2: Table Of Contents
Contents Read me first......................3 Avoiding malfunction and damage....................4 What’s in the box..........................5 Installation......................6 Connection overview........................7 Choosing the correct position.......................8 Wiring the PRO i..........................9 Configuring the PRO i in Webfleet.................... 10 Configuring the PRO i in the LINK Toolkit app................11 Mounting the PRO i........................ -
Page 3: Read Me First
Read me first... -
Page 4: Avoiding Malfunction And Damage
Avoiding malfunction and damage Before installing and operating this product, please read the installation guide which you can find on www.webfleet.com/support IMPORTANT: To avoid any malfunction or damage, carefully read these instructions and important safety notices and warnings before installing and using this device. Keep this document for future reference. -
Page 5: What's In The Box
What’s in the box PRO i • Display 2. RFID reader 3. Power data cable 4. Service/Update Mini-USB-cable connector Mounting adapter • Air vent mount including self tapping screw • Fixings – adhesive strip, cleaning tissue • Molex 12-pin connector cable •... -
Page 6: Installation
Installation... -
Page 7: Connection Overview
Connection overview LINK** PRO i (green/white) 12-pin Molex connector cable Clamp 31 (brown) Clamp 30* (red) PWR+ (+9...30 V) * Make sure this wire is fused with max. 3 A. ** LINK 740/710... -
Page 8: Choosing The Correct Position
Choosing the correct position First you need to choose the correct position in which to install your PRO i. Take the following into consideration: Do not expose the PRO i to direct sunlight and/or high temperature for long periods to •... -
Page 9: Wiring The Pro I
Wiring the PRO i Connect the PRO i to the vehicle power supply with the standard vehicle voltage (12 V/24 V) and to the LINK 740/710 installed in your vehicle. The three wires DAT, GND and PWR+ (supply voltage) must be connected. Prerequisites For a successful installation of the PRO i you need a LINK 740/710 with the latest firmware and a Webfleet ECO subscription or higher assigned. -
Page 10: Configuring The Pro I In Webfleet
Configuring the PRO i in Webfleet After you have properly wired your PRO i you may need to configure your LINK device in Webfleet. To configure your LINK 740/710 to be used together with the PRO i, do the following: Log in to Webfleet. -
Page 11: Configuring The Pro I In The Link Toolkit App
Configuring the PRO i in the LINK Toolkit app After you have properly wired your PRO i you may need to configure your LINK device in the LINK Toolkit app. If the output OUT of your LINK had not been configured for other usage before, it will be automatically configured to be used for the PRO i. -
Page 12: Mounting The Pro I
Mounting the PRO i You have the following options to mount your PRO i: Using the adhesive tape, to stick it to a plane surface. • Using the air vent mount. • Using the universal suction mount, offered as an additional accessory (Art# •... -
Page 13: Attaching The Pro I To The Air Vent
Attaching the PRO i to the air vent You can attach the PRO i to the air vent of your vehicle. Follow the safety instructions in this document. Fix the Air vent mount to the back of the Mounting adapter using the self tapping screw. -
Page 14: Support
Support If you have troubles during the installation, you can search for FAQs or contact our support team on www.webfleet.com/support. -
Page 15: Technical Data
Technical data Dimensions 112.5 x 60 x 11.2 mm/4.4 x 2.4 x 0.4 inches Weight Device including cable: 126 g Mounting adapter: 8 g Material Injection moulded plastic, PC/ABS Protection class IP 20 Supply voltage 12 V / 24 V (minimum 9 V to maximum 30 V) Current power con- At 14 V: typically <... -
Page 16: Compliances
Compliances To see the compliance labels for your PRO i do the following. Switch on the display by tapping the Display. 2. In the main menu select Settings. 3. Select Info. 4. In the Info screen tap Compliances. Use the arrow buttons to scroll between the different labels. -
Page 17: Addendum
Addendum... -
Page 18: Important Safety Notices And Warning
Important safety notices and warning IMPORTANT: Read the following safety instructions carefully. Read the instructions in this document carefully. Webfleet accept no liability for damage that results from disregarding the safety instruc- tions. This document is part of the product. Keep it in a safe place. If you pass the unit on to a new user, make sure you give them this document as well. -
Page 19: Ce/Uk Mark And Radio Equipment Directive
Proper mounting – Do not mount the device in a way that may obstruct your view of the road or your ability to control the vehicle. Do not place the device in an area that may ob- struct the deployment of an airbag or of any other safety feature of your vehicle. Pacemakers –... -
Page 20: Triman Logo
Triman logo WEEE – e-waste disposal In the EU/EEA, this product is marked with the crossed out wheeled bin symbol on its body and/or packaging as required by Directive 2012/19/EU (WEEE). This product shall not be treated as household waste or be disposed of as unsorted municipal waste. You can dispose of this product by returning it to the point of sale or bringing it to your local mu- nicipal collection point for recycling. -
Page 21: Technical Specifications
Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the re- • ceiver is connected. Consult the dealer or an experienced radio/TV technician for help. •... -
Page 22: Operating Temperature
At 28 V: 0.05 A Frequencies RFID interfaces: 13.56 MHz, 125 kHz Bluetooth®: 2.4 GHz Operating temperature This device will remain fully operational within the following temperature range: -20 °C to +70 °C / -4 °F to +158 °F. Prolonged exposure to higher or lower temperatures can cause damage to your device and is therefore advised against. -
Page 23: Rohs Statement - Webfleet
tees that PRO i meets REACH guidelines. For details, see the European Union official web- site: http://echa.europa.eu/candidate-ist-table RoHS statement – Webfleet Guarantee: In response to the environment protection conscious, Webfleet has established a comprehensive programme that enables products to comply with the European Union‘s Restriction of Hazardous Substances (2011/65/EU+2015/863). -
Page 24: Chile
The Country Code Selection feature is disabled for products marketed in the US or Canada. Equipment is certified to the requirements of RSS-210 for 13.56 MHz. ISED RSS-Gen Notice (in French) L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. -
Page 25: Notice For South Africa
Notice for South Africa This product displays the ICASA logo to show it complies with all relevant South African radio equipment certifications Webfleet Telematics Service Platform To use the PRO i you need a valid and active Webfleet Telematics Service Platform sub- scription. -
Page 26: Terms And Conditions And Limited Warranty
Copyright notices © 2023 Bridgestone Mobility Solutions B.V. All rights reserved. Webfleet is a registered trademark of Bridgestone Mobility Solutions B.V. or one of its Affiliates. Copyright (c) 2018 - Tcl/Tk - Regents of the University of California, Sun Microsystems, Inc., Scriptics Corporation, and other parties https://www.tcl.tk/... -
Page 27: Opensynergy
CD-ROM or such other tangible media as Webfleet shall provide, upon written request to: 'The Legal Department, Bridgestone Mobility Solutions B.V., Beethovenstraat 503, 1083 HK Amsterdam, The Netherlands.' This offer is valid for a period of three years...