Advertisement
Quick Links
USER MANUAL - ICUSB-7
DOUBLE USB CHARGER
Specification of ICUSB-7 double USB charger
The ICUSB-7 charger is intended to charge devices like smartphones, tablets and other electronic
equipment. Before connecting the device, check compliance of the charger with charging
parameters of the given device.
Specification
Number of USB ports (type C)
Nominal input voltage
Nominal output current
Maximum output power
Maximum power consumption in idle mode
Operating temperature and humidity
Storage temperature and humidity
Ingress protection degree
53,90
2
100-240 V~ 50/60Hz
5V/3A, 9V/2.22A, 12V/1.67A (when device is
ź
connected to only one USB output)
5V/3.1A (in the case of connecting devices to
ź
two outputs, the output current is divided
equally between each USB socket)
20 W
0.1 W
0
-10 ÷ +40 C; 20~90% RH
0
-20 ÷ +85 C; 10~95% RH
IP 20
45,50
1 I 3
Advertisement
Related Manuals for Karlik ICUSB-7
Summary of Contents for Karlik ICUSB-7
- Page 1 DOUBLE USB CHARGER Specification of ICUSB-7 double USB charger The ICUSB-7 charger is intended to charge devices like smartphones, tablets and other electronic equipment. Before connecting the device, check compliance of the charger with charging parameters of the given device.
- Page 2 Detection function of available charger protocols: - when using only one USB-C output APPLE 5V 2.4A BC 1.2 DCP 5V 1.5A SAMSUNG AFC HUAWEI FCP 5V, 9V, 12V QC 2.0 5V, 9V, 12V QC 3.0 11.70V max - when using both 2 x USB-C outputs APPLE BC 1.2 DCP 5V 1.5A...
- Page 3 ASSEMBLY INSTRUCTIONS 1. Remove the glass panel (1) with the label applying a knife or a flat screwdriver in the recess (3). 2. Unscrew the screw (2) and pull out the adapter (3) together with the USB charger module (4). If necessary, you can detach the USB charger module (4) from the adapter (3) by simultaneously pressing the two movable clips on the USB charger module (4).