Table of Contents
Advertisement
2-5.
DECK SECTION
Tape Playback
1 Press TAPE.
TAPE appears in the display.
2 Insert the tape.
3 Press < (for reverse side playback)
or > (for front side playback).
How to select the DIRECTION MODE
position
To playback one side: Select ==.
To playback both sides: Select GD.
The DIRECTION MODE setting is effective
for both decks.
To stop playback
Press @.
Playing Back Automatically
after Fast Winding
— Auto Play
This function starts playback automatically
from the beginning of the side after fast
winding.
To start playback from the beginning of the
front side:
press > while keeping «#4 pressed
To start playback from the beginning of the
reverse side:
press <] while keeping B® pressed.
When listening to the cassette recorded
with Dolby noise reduction system*
Set the DOLBY NR switch to ON.
Dolby NR (noise reduction) system reduces
tape hiss noise in low-level high-frequency
signals. The system boosts these signals in
recording and lowers them in playback.
nn
a eee
» Dolby noise reduction manufactured under
license from Dolby Laboratories Licensing
Corporation.
"DOLBY" and the doubie-D symbo! 90) are
trademarks of Dolby Laboratories Licensing
Corporation.
DIRECTION MODE
DOLBY NR
Baie
Playing Both Decks in
Succession — Relay Play
Relay play always follows the sequence
below regardless of where playback starts.
When playback of the reverse side of the
tape in deck B is completed, the following
sequence continues 4 more times.
Deck A
(Front side)
Deck A
(Reverse side)
Deck B
(Front side)
1 Insert recorded cassettes in both
decks.
Deck B
(Reverse side)
2 Set DIRECTION MODE to RELAY.
3 Press
or <Jon deck A or deck B.
To stop relay play
Press lM of the deck playing.
Notes on Cassettes
To protect recording EY
Break out the tab on the left shoulder of the
cassette side of which recording is to be
protected.
To re-record the cassette EJ
Cover each slot with plastic tape.
are necessary for automatic tape type
detection.
Hho
&
DIRECTION MODE
RELAY
OOVTH/0
Advertisement
Table of Contents
