Advertisement
WARNING
Safety & Warnings
The VYPER CHAIR complies with all legally prescribed safety rules and
regulations. Inappropriate use may cause damage to the product and
injury or death to persons.
It is crucial to read the operation manual prior to using the VYPER CHAIR.
It provides you with important information about safe and proper
assembly, use and maintenance of the VYPER CHAIR.
Children should never use this VYPER CHAIR unless closely supervised by
an adult.
Do not allow horseplay on or around the VYPER CHAIR.
SERIOUS OR FATAL INJURY CAN OCCUR FROM THE VYPER CHAIR
FROM TIPPING OVER OR FALLING OFF OF THE VYPER CHAIR.
ACCORDINGLY:
Keep weight centered when using the VYPER CHAIR.
Only use VYPER CHAIR on a flat level surface, free of debris.
Keep one or both feet on the ground at all times when sitting on the
VYPER CHAIR.
Never stand on the VYPER CHAIR.
Never allow more than one person on the VYPER CHAIR.
DO NOT USE THE VYPER CHAIR IF IT APPEARS DAMAGED OR BROKEN.
WARNING:
To avoid the danger of suffocation, keep this plastic bag away
from babies and children. Do not use this bag in cribs, beds, carriages or
playpens. This bag is not a toy.
Read all instructions before assembly and use of VYPER CHAIR. Failure
to comply with and observe all assembly, safety, operating instructions
and warnings regarding the use of the VYPER CHAIR may result in serious
bodily injury or death.
This includes strictly following all assembly instructions in the order in which
they appear.
Assembling any VYPER CHAIR in an order other than that set out in the instructions
increases the risk of product damage or injury or death to individuals.
Never attempt to sit on the VYPER CHAIR until it is fully assembled and all
the fasteners are tightened in accordance with the assembly instructions.
Failure to comply with this warning can lead to product damage and
injury or death to individuals.
Do not attempt to repair any broken or defective parts or assemble using
any parts that are damaged or defective. Please contact manufacturer
immediately at: sales@VYPERindustrial.com
Never use substitute parts when assembling the VYPER CHAIR. Please
contact manufacturer immediately if replacement parts are needed at
VYPER CHAIR.
3/8
3/8
3/4
3/4
1/2" WRENCH AND/OR SOCKET
3/8
3/8
TOOLS REQUIRED
x2
1/2
1/2
FOR ASSEMBLY
x2
3/4
1/2
1/2
VYPER was founded by the Rusch Family, a family that spent countless hours in the
garage, starting one project after another. After years of torture using cheap chairs
and hundreds of falls, Chris Rusch (known for being a master in metal shaping),
designed & built the first ever VYPER Chair.
The VYPER Chair is strategically designed to prevent tipping over while rolling,
3/8
3/8
provides relieving back support, improved sitting posture and increase comfort
while using the highest quality American-made materials.
With their passion for the garage industry, Dayne and Dylan (the brothers) took
3/8
3/8
over VYPER years ago with the determination to launch the highest quality
3/4
3/4
products in any industry under the VYPER Brand while continuing to provide jobs
to the American people.
3/4
3/4
1/2
1/2
1/2
1/2
|
3/8" WRENCH AND/OR SOCKET
3/4" WRENCH AND/OR SOCKET
x1
or x2
3/8
3/8
*POWER TOOLS NOT RECOMMENDED!
or x2
3/4
3/4
3/4
1/2
1/2
3/8
3/8
3/4
3/4
1/2
1/2
or x1
Advertisement
Need help?
Do you have a question about the LOW PRO and is the answer not in the manual?
Questions and answers