Maximum image diameter: 28mm (for flat field crisp projection eg: logos) | 30mm (for soft edges, eg: breakup images) Maximum thickness: up to 5.0mm If in doubt please contact Gobotech - www.gobotech.com.au to confirm the gobo specifications for the fixture model you have quoting the serial number.
During the standard warranty period, Gobotech will, (following prompt written notice of the issue(s) and a reasonable period for investigation) at its discretion, repair or replace either the whole Grand Lighting product or any part of it that Gobotech deems to be defective as a result of a material or manufacturing fault.
Need help?
Do you have a question about the GRAND LIGHTING GL80 L25 and is the answer not in the manual?
Questions and answers