Advertisement
Quick Links
Quick Start Guide
WHITE LED LIGHTS &
BLUETOOTH SPEAKERS
Quick Start Guide (English)
Introduction
Thank you for your interest in us! We are the home of The Original Solar Flag Lamps.
Your flags, pennants, banners, signage and equivalents are as important to us as
they are to you. That's why we design and offer products with one thing in mind,
to make your hanging decorations stand out with vivid lights and music.
You can customize your celebrations throughout the year!
Package Contents
Qty Item
The Original Solar Flag Lamps (White LED Lights
1
with Built‐in Bluetooth Speakers)
2
Custom Clamps and ONE 3/32" Hex Tip Wrench
Clamp Set Screws, Stainless Steel, 10‐32 Thread,
2
1/2" Long (Used with our Custom Clamps to secure
unit to a House/Structure mounted flag pole)
Clamp Set Screws, Stainless Steel, 10‐32 Thread, 1"
2
Long (Used with our Custom Clamps to secure unit
to a Garden Flag Stand)
Garden Flag Stand Clamp Bushings
2
(Used with our Custom Clamps to secure unit to a
Garden Flag Stand)
1
AC/DC Power Converter Adapter
1
Quick Start Guide
1
Safety, Use & Care Instructions Manual
Page 2
Advertisement
Summary of Contents for Flaglamps Original
- Page 1 Quick Start Guide (English) Introduction Thank you for your interest in us! We are the home of The Original Solar Flag Lamps. Your flags, pennants, banners, signage and equivalents are as important to us as they are to you. That’s why we design and offer products with one thing in mind, to make your hanging decorations stand out with vivid lights and music. You can customize your celebrations throughout the year! Package Contents Quick Start Guide Qty Item The Original Solar Flag Lamps (White LED Lights 1 with Built‐in Bluetooth Speakers) 2 Custom Clamps and ONE 3/32” Hex Tip Wrench Clamp Set Screws, Stainless Steel, 10‐32 Thread, 2 1/2" Long (Used with our Custom Clamps to secure ...
- Page 2 Setup How To Videos and Support 1. Ensure all items listed in the Package Contents are included in the To view how to install videos: https://flaglamps.com/pages/how‐to‐install‐and‐use package. To contact us: https://flaglamps.com/pages/contact‐us 2. Read the Safety, Use & Care Instructions Manual before using the product. Outdoor Use and Care 3. Ensure the battery is completely charged prior to first use for maximum battery life. Designed to IPX4 standards, The Original Solar Flag Lamps are water‐resistant and protected against splashing water in any direction, such as light rain or light water Features spray. Please review the below tips to get the best performance from The Original Solar Flag Lamps. Main Power Button: Press this button to power The Original Solar Flag Lamps ON and OFF. Bring The Original Solar Flag Lamps indoors during extreme weather. Main Power‐On Indicator: This Green LED light will be DO NOT place The Original Solar Flag Lamps in standing water. ON or OFF based on the Main Power Button position. The Original Solar Flag Lamps are intended to be used outdoors with Battery Level Indicator: This LED light reflects the following ...
- Page 3 Run‐Time Button: Press and hold this button for 5 seconds, to enter programming mode. Installation The Battery Level Indicator will begin to blink, to show the current run‐time setting. The Original Solar Flag Lamps are designed for installing onto a Available Run‐ Default Run‐Time Setting Information Unit’s run‐time Time Settings house/structure mounted flag pole or the cross bar of a garden flag stand, with 1” and .31” diameters respectively. The default run‐time setting is 6 hours. 1, 2, 3, 4, 5, and 6 1, 2, 3, 4, 5, and 6 short blinks hours respectively Using the Power Button will set the run‐ Installing onto a Garden Flag Stand (GFS) time to the default run‐time setting. One long blink All night Changing the default run‐time setting: While in run‐time programming mode, quickly Tool needed: 3/32” Hex Tip Wrench press/release this button to toggle through the available run‐time settings. Stop at your desired setting. Programming mode will save your selection and exit after 60 seconds from Before you begin, complete the steps in the Setup Section. the last press of the button. Run‐time timer begins each time a dusk condition is auto‐ sensed. A dusk condition can either be actual night time, a darkened room or covering the 1. Install your garden flag onto your GFS. Using the guidance in the Outdoor Use and ...
- Page 4 Installing onto a House/Structure Mounted Flag Pole Tool needed: 3/32” Hex Tip Wrench Before you begin, complete the steps in the Setup Section. 1. Place your unit on a flat stable surface, and place your house/structure mounting flag pole in the unit’s center channel. Take care that the unit is approximately six (6) inches from the end of the flag pole. 6” 2. Install the provided 1/2” Clamp Set Screws into each of the Custom Clamps. 3. Place the provided Clamps onto the flag pole 4. Using 3/32” hex tip wrench, tighten the and slide the Clamps over the unit’s Fastener Clamp Set Screws to secure unit. Necks. *** DO NOT OVER TIGHTEN *** 5. The manufactured default setting for the LED light feature is six hours, once a dusk condition is detected. In the Features section, see Run‐Time Button instructions to change this default setting. 6. Install your flag onto your flag pole. Using the guidance in the Outdoor Use and Care section, install your flag pole in a location where you wish to display your special flags and listen to your music too. ...