Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for BINBOK VR T3 Plus
Summary of Contents for BINBOK VR T3 Plus
- Page 1 BINBOK VR T3 Plus For Meta/Quest 3 VR39-1...
- Page 2 1. Right Side Strap 2. Left Side Strap 3. Top Strap 4. Rear Fit Wheel 5. Battery Cable 6. Rear Brace 7. Cable Clip 8. Charging Port 9. Power Button 10. Charging Port...
- Page 3 Step 1 Attach the Rear Brace to the Strap Clip the rear brace into the strap according to the corresponding R and L letters-you will hear a clear "click" as it attaches.
- Page 4 Step 2 Install the Top Strap Thread the top strap through the bracket of the rear brace. Smooth side down.
- Page 5 Step 3 Pull Out the Facial Interface Remove the facial interface from the Quest 3 headset.
- Page 6 Step 4 Thread and Fasten the Top Strap Thread the top strap through the bracket in the front of the Quest 3 to fasten it.
- Page 7 Step 5 Attach Side Straps Hook the strap sides to the arms of the headset snap on by applying pressure down.
- Page 8 Step 6 Re-insert the facial interface and snap it into place.
- Page 9 Step 7 Attach the magnetic battery to the head strap Align the magnetic battery contacts with the pins on the head strap to attach the battery to the head strap and begin charging.
- Page 10 Simultaneous Charging To charge the Quest 3 headset and head strap battery at the same time, make sure to connect the battery cable from the strap to the headset's USB-C port, and press the power button once after plugging it into the charger.
- Page 11 Power button is designed for activating the smart charging on the Quest 3. To charge the strap individually, leave the power button in the" Off" position after plugging it into charge.
- Page 12 Power the charger station Connect the cable to the Type-C port to start supplying power to the charger station.
- Page 13 Attach the magnetic battery to the charger station Align the magnetic battery contacts with the pins on the charger station to attach the battery to the station and begin charging.
- Page 14 Charging: LED flashes at current power level Fully Charged: LED1-4 lights up...
- Page 15 Product Electrical Specifications Product Model VR39-1 Material Rear Brace(TPU), Cushioned Top Strap(PU), Shell(PC+ABS Fire-proof Material) Battery Type Lithium Ion Polymer Nominal Capacity 8000mAh/29.6Wh Type-C Cable 5.0V3A±0.3A(max) Output Parameter Type-C Port 5.0V3A±0.3A(max) Type-C Port Type-C :5.0V３A±0.3A(max) Input Parameter Charger Station Type-C :5.0V３A±0.3A(max) Operating Temperature 0~45℃...
- Page 16 Health & Safety Warnings To reduce the risk of personal injury,discomfort or property damage,please ensure that all usersof theses accessories carefully read the warnings below. 1. It is important that you carefully read the Health and Safety Guide enclosed with your VR headset in addition to these warning before using your VR system.
-
Page 17: Safety Guidelines
Safety Guidelines 1. DO NOT allow the product to come into contact with any kind of liquid. DO NOT leave the product out in the rain or near a source of moisture. DO NOT drop the product into water. If the inside of the battery comes into contact with water, chemical decomposition may occur, potentially resulting in the battery catching on fire, and may even lead to an explosion. - Page 18 8. DO NOT store the product fully discharged for an extended period. Otherwise, it will over discharge, which will lead to permanent damage. 9. DO NOT attempt to charge or use the headset or Excellence Strap With Battery if it does not turn on after attempted charging, if it gets abnormally warm when it is used or charged, or if the battery compartment is swollen,leaking liquid,or smoking.
- Page 19 To reduce risk of electric shock: • Do not modify or open any of the components provided. • Do not charge this device if any part of the AC Adapter cable is torn, any wires are exposed, or battery compart- ment damaged.
Need help?
Do you have a question about the VR T3 Plus and is the answer not in the manual?
Questions and answers