Build with Robots Breezy Blue Response User Manual

Disinfecting minibot
Table of Contents

Advertisement

Quick Links

User Manual
Model: Breezy Blue Response (SKU: BBR01)
With Bluetooth® Wireless Technology
D001102 Rev A.1
www.BuildWithRobots.com
Page 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Breezy Blue Response and is the answer not in the manual?

Questions and answers

Summary of Contents for Build with Robots Breezy Blue Response

  • Page 1 User Manual Model: Breezy Blue Response (SKU: BBR01) With Bluetooth® Wireless Technology D001102 Rev A.1 www.BuildWithRobots.com Page 1...
  • Page 2: Manufacturer And Contact Information

    Albuquerque, NM 87102 For product information, sales, service, and technical support: https://buildwithrobots.com/ Customer Support Phone: (833) 273-3991 Email: info@buildwithrobots.com This manual covers model: Breezy Blue Response (BBR01) SPECIFICATIONS: Voltage: 110-120 VAC Watts: 1080 W Amps: 9.0 A Hertz: 50-60 Hz D001102 Rev A.1...
  • Page 3: Safety Symbols

    Safety Symbols These symbols and terms may appear on the product and in this user manual: Refer to the user manual for warning information to avoid hazard or personal injury and prevent damage to device. Alternating current (AC) CAUTION indicates an imminently hazardous situation CAUTION which, if not avoided, may result...
  • Page 4: General Safety Summary

    General Safety Summary Review the following safety precautions to avoid injury and prevent damage to this product. To avoid potential hazards or harm, use this product only as specified. Failure to comply with the precautions and warnings in this manual violates the safety standards of the design, and the intended use of the product.
  • Page 5 Do not operate without covers. Do not operate this product with covers or panels removed. Avoid exposed circuitry. Do not touch exposed connections and components when power is present. Do not operate with suspected failures. If you suspect that there is damage to this product, have it inspected by qualified service personnel.
  • Page 6 Use only BWR-approved solution in the product. Read and understand all safety and operational documentation for solution. Consult the safety data sheet and follow the recommended safety precautions when handling the solution and fogging. Stay clear of area being treated while in use. Keep the room, vehicle, or immediate area to be treated clear of people, animals, food, etc.
  • Page 7: Environmental Considerations

    Environmental Considerations This section provides information about the environmental impact of the product. Product End-of-Life Handling Observe the following guidelines when recycling an instrument or component: Equipment recycling. Production of this device required the extraction and use of natural resources. The device may contain substances that could be harmful to the environment or human health if improperly handled at the product’s end of life.
  • Page 8: Table Of Contents

    Functions and Operating Descriptions .................... 18 Default Factory Settings ........................18 Push Button Operation ........................18 BB01-WC Wireless Controller Setup (Not included with Breezy Blue Response) ....20 Controller navigation overview ....................20 Connecting to Wi-Fi ........................21 Setting screen timeout (optional) ....................22 Setting lock screen PIN (optional) ....................
  • Page 9 Alias Button ............................30 Duration Button ..........................31 Schedule Button ..........................33 Update Tab ............................36 Remote Controlled Operation ......................37 Approved BWR Solutions ........................38 Fill Port Instructions ..........................38 Filling the Solution Tank from Empty ..................... 38 Filling the Solution Tank When Solution Level is Low ..............39 Emptying the Solution Tank ......................
  • Page 10 List of Figures Figure 1: Overview of Breezy Blue Response device. Top/side view (left) and bottom view (right)............................... 14 Figure 2: Power Breezy Blue Response on and off (electrical inputs) ........17 List of Tables Table 1: General features for Breezy Blue Response ..............12 Table 2: Environmental Specifications for Breezy Blue Response ..........
  • Page 11: Preface

    Preface This manual describes the setup and operation of Build With Robots automated fogging technology. The following device is supported by this manual: Breezy Blue Response Where to find more information Item Purpose Location Safety, Safety and Compliance, Compliance and Basic...
  • Page 12: General Information

    General Information The Build With Robots Breezy Blue™ Response is a self-contained, portable, and remote controlled cold fog dispensing system. Compatible with Build With Robots approved solutions, Breezy Blue Response can eliminate dangerous pathogens and organisms. Breezy Blue also collects and presents data to assure that your space has been thoroughly and properly treated.
  • Page 13: Service Information

    • 1 x Safety and Compliance Instructions (printed) • 1 x AC power cord • 1 x Breezy Blue Response The appearance or components of the product may differ depending on the model. If anything is missing, please contact Build With Robots.
  • Page 14: Figure 1: Overview Of Breezy Blue Response Device. Top/Side View (Left) And Bottom View (Right)

    Product Overview Figure 1: Overview of Breezy Blue Response device. Top/side view (left) and bottom view (right). 1. Fog outlet 2. Handle 3. Fogger enable/disable button 4. Fill port cap 5. Status lights (waist and button) 6. Power connector 7. Air intake D001102 Rev A.1...
  • Page 15: Getting Started

    • Place device on a solid, level surface or cart • Device is not meant to be operated while moving • Install equipment so that power cord is easily accessible Table 2: Environmental Specifications for Breezy Blue Response Product Specification Description...
  • Page 16: Power Supply Requirements

    WARNING. To reduce the risk of fire and shock, ensure that the main supply voltage fluctuations don’t exceed 10% of the operating voltage range. Table 3: Power Specifications for Breezy Blue Response AC Input 110-120 VAC (+/- 10%), CAT II...
  • Page 17: Powering The Device On And Off

    Powering the Device ON and OFF Figure 2: Power Breezy Blue Response on and off (electrical inputs) The following instructions show how to apply power to the device and turn it on and off. Refer to Figure 1 and 2.
  • Page 18: Functions And Operating Descriptions

    Functions and Operating Descriptions Below are the default settings and instructions for using the unit without the use of a wireless controller (sold separately). The unit will provide the user visual and audio status using the mechanisms shown in Table 4. Also see Fill Port Instructions – Filling the Solution Tank when Low for more information.
  • Page 19: Table 4: States And Status Indicators For Breezy Blue Response

    Table 4: States and Status Indicators for Breezy Blue Response Status LED Ring Button Audio Status Breezy LEDs Icon Controller Icon Out of Range Device of Controller option Option or Off below or below Found During Connection option Option Detected...
  • Page 20: Bb01-Wc Wireless Controller Setup (Not Included With Breezy Blue Response)

    BB01-WC Wireless Controller Setup (Not included with Breezy Blue Response) It is recommended that you charge the controller fully before use. Controller navigation overview Basic controls are the same as an Android phone. 1. The Home button is located at the center-bottom of the screen (left picture above).
  • Page 21: Connecting To Wi-Fi

    Connecting to Wi-Fi Connecting to Wi-Fi is required for receiving app and firmware updates. App updates will occur automatically if connected to Wi- 1. Power controller on 2. Select settings from the icon on the main screen 3. Enter 1234, then press OK 4.
  • Page 22: Setting Screen Timeout (Optional)

    Setting screen timeout (optional) 1. Select settings from the icon on the main screen 2. Enter 0000, then press OK 3. Select Hardware 4. Select Display Timeout (seconds) 5. Select the preferred display timeout from list of options. D001102 Rev A.1 www.BuildWithRobots.com Page 22...
  • Page 23: Setting Lock Screen Pin (Optional)

    Setting lock screen PIN (optional) 1. Select settings from the icon on the main screen 2. Enter 0000, then press OK 3. Select the settings gear 4. Select Security 5. Select Screen lock 6. Select PIN (or other options) and follow in screen instructions If you choose to change the default PIN to a customized PIN, BWR will NOT be able to recover your controller in the event you lose or forget your customized PIN.
  • Page 24: Updating Android Kiosk Pin For Wi-Fi And Settings (Optional)

    Updating Android Kiosk PIN for Wi-Fi and settings (optional) 1. Select settings from the icon on the main screen 2. Enter 0000, then press OK 3. Select Admin 4. Select Settings Password and follow on-screen instruction to set new PIN, then press OK. This PIN is used to configure any system settings on the controller.
  • Page 25: Log-In

    Log-in Press the physical home button on the controller. 1. Select the Breezy Blue logo on the upper left-hand side of the screen to open the app – if it doesn’t open automatically. 2. Select CONTINUE AS GUEST. D001102 Rev A.1 www.BuildWithRobots.com Page 25...
  • Page 26: Main Screen Overview

    Main Screen Overview 1. Controller clock – The time will automatically update to your local time when the controller is connected to Wi-Fi. Ensure this time is correct before scheduling Breezy Blue fogging events. 2. Available devices button – Available Breezy Blue devices that are in range but not paired to the controller will be shown when this button is pressed.
  • Page 27: Pairing

    Pairing 1. Press Available devices button. 2. Press the Unpaired button to show available devices in range of controller. 3. A list of devices will be shown. Press PAIR DEVICE button on device intended to be paired, in this case 001016. 4.
  • Page 28: Unpairing

    Unpairing 1. Select the information icon towards the upper right corner of unit to be unpaired. 2. Press the UNPAIR DEVICE button. 3. The Unpaired unit’s card will now be absent from the Main Screen D001102 Rev A.1 www.BuildWithRobots.com Page 28...
  • Page 29: Status Tab

    4. Tank level – Shown in six increments. A red tank indicator is displayed when empty. See “Fill Port Instructions” for instructions on refiling the tank with Build With Robots approved solution. 5. Start / Stop Button – Used to initiate and cancel a fogging event remotely.
  • Page 30: Config Tab

    Config Tab Alias Button Limited to 24 characters. (ex. Class 202, Firehouse 12, Casino 1st floor) 1. Select the Config tab. 2. Select the Alias button. 3. Type new Alias name in the Alias Field 4. Press “WRITE ALIAS” button. 5.
  • Page 31: Duration Button

    Duration Button Fogging duration and Countdown duration are both configurable on this tab. Fogging duration defines the time Breezy Blue dispenses fog in the area. 1. Fogging duration is set to 30 seconds at the factory. It can be configured by selecting the fogging duration time dropdown and picking an option from the list.
  • Page 32 Countdown duration defines the time that the Breezy Blue alerts the people in the area that a fogging event will occur and that they should leave the area or press the disable button. 5. Countdown duration is set to 20 seconds at the factory. It can be configured by selecting the countdown duration time dropdown and picking an option from the list.
  • Page 33: Schedule Button

    Schedule Button SYNCHRONIZE TIME aligns the Breezy Blue time with the controller time. This is necessary to ensure the scheduled fogging events occur at the time intended. The Breezy Blue time should be synchronized every few months if it is important to fog at a specific time.
  • Page 34 CONFIGURE SCHEDULE Allows the operator to define a schedule for Breezy Blue to automatically fog up to one occurrence per 1. On the Config tab, press the “CONFIGURE SCHEDULE” button 2. Select the day on the week that the schedule should start. 3.
  • Page 35 RESET SCHEDULE Allows the operator to clear the existing schedule so the Breezy Blue will no longer fog on a regular schedule 1. On the Config tab, press the “CONFIGURE SCHEDULE” button 2. On the Configure Schedule screen press the “RESET SCHEDULE”...
  • Page 36: Update Tab

    Update Tab If connected to Wi-Fi, the controller will automatically update the app as new versions are released. The updated app may also include a firmware update that can be applied to each Breezy Blue unit using the instructions below. 1.
  • Page 37: Remote Controlled Operation

    Remote Controlled Operation 1. Verify the Breezy Blue unit to be fogged displays “Ready to Fog” on the controller display, then press the “START” button. 2. A 20 second (default) countdown to fogging will initiate. The Breezy Blue waistband light will flash red and there will be an audible warning to leave the area.
  • Page 38: Approved Bwr Solutions

    1. Unscrew the fill port cap. 2. Ensure the screen filter is in place and free of debris. 3. Pour up to 3.8L (1 gal) of Build With Robots approved solution into tank. Stop filling if solution level is visible in the screen filter.
  • Page 39: Filling The Solution Tank When Solution Level Is Low

    1. Unscrew the fill port cap. 2. Ensure screen filter is in place and free of debris 3. Slowly pour up to 3.8L (1 gal) of Build With Robots approved solution into tank until the tank icon on the controller shows the tank is full or if solution level is visible in the screen filter*.
  • Page 40: Troubleshooting

    Troubleshooting Table 5: Breezy Blue Troubleshooting PROBLEM POSSIBLE SOLUTION CAUSES Waist band light does not Unit is not powered Ensure unit is fully plugged in illuminate both at the power input module on the underside of the unit and at the outlet, and that the outlet is working Damaged fuse Replace fuse in socket next...
  • Page 41: Maintenance

    Maintenance Table 6: Breezy Blue Scheduled Maintenance Part Clean/Replace Fill port screen Remove and clean fill port screen filter every 10 gallons of filter solution or when contaminated using water and a soft brush Exterior Wipe down exterior of unit monthly using a cloth wetted with water or 70% isopropyl alcohol Synchronize If using the scheduling feature, Synchronize Breezy Blue with...
  • Page 42: Limited Warranty (Usa/Canada)

    LIMITED WARRANTY (USA/CANADA) Build With Robots warrants that this product will be free from defects in materials and workmanship for a period of one (1) year from the date of shipment. If any such product proves defective during this warranty period, Build With Robots, at its option, either will repair the defective product without charge for parts and labor, or will provide a replacement in exchange for the defective product.

This manual is also suitable for:

Bbr01

Table of Contents