Advertisement
Available languages
Available languages
Thermo-Hygro-7CH-Sensor
868MHz
Art. Nr.: 7009999
B
Station
Wait 5s
MANUAL DOWNLOAD:
www.bresser.de/P7009999
Instruction Manual
GB
General Warning
DANGER!
This device contains electronic components which operate
via a power source (power supply and/or batteries). Do not
let children use the device while unattended. Only use the
device as described in the manual, otherwise you run the risk
of an electric shock.
Children should only use the device under adult supervision.
Keep packaging material, like plastic bags and rubber bands,
out of the reach of children, as they pose a choking hazard.
Keep batteries out of the reach of children. Make sure you
insert the batteries correctly. Empty or damaged batteries
could cause burns if they come into contact with the skin. If
necessary, wear adequate gloves for protection.
DANGER!
Do not expose the device to high temperatures. Use only
the recommended batteries. Do not short-circuit the device
or batteries, or throw them into a fire. Excessive heat or
improper handling could trigger a short-circuit, a fire or an
explosion!
NOTE!
Do not disassemble the device. In the event of a defect, plea-
se contact your dealer. The dealer will contact the Service
Centre and can send the device in to be repaired, if neces-
sary.
Use only the recommended batteries. Always replace weak
or empty batteries with a new, complete set of batteries at
full capacity. Do not use batteries from different brands or
with different capacities. The batteries should be removed
from the unit if it has not been used for a long time.
NOTES ON CLEANING
Separate the device from the power supply or remove the
batteries before cleaning.
NOTE!
Only use a dry cloth to clean the exterior of the device. Do
not use any cleaning fluid to avoid damaging the electronics.
SCOPE OF DELIVERY
Outdoor sensor, instruction manual, batteries required (not
included): 2 pcs. Batteries (1.5V, type AA)
FEATURES OF THE REMOTE UNIT
A
C
D
Sensor
5 sec
B
C
D
E
A LED INDICATOR
Flashes when information is being transmitted to the
weather station.
B WALL MOUNT
For mounting the sensor on walls.
C SET THE TRANSMISSION CHANNEL (1-7)
Input channel for the weather station. Set the channel
before inserting the batteries.
D RESET BUTTON
Press to reset all setting if you have selected different
channel.
E BATTERY COMPARTMENT
Unit requires 2 pcs. AA/LR6 1.5V batteries.
FIRST OPERATION
1. Open the battery compartment cover.
2. Set the desired channel with the switch. If you are using
only one transmitter, please leave the selection at „1".
3. Insert 2 new UM-3 or „AA" 1.5V batteries observing
correct polarity.
4. Close the battery compartment cover and set the unit in
the desired location.
Although the outdoor sensor is weatherproof, it should not
be placed in places exposed to direct sunlight, rain or snow.
TIPS FOR SETTING UP:
Please follow the instructions below to ensure optimum
operation of the equipment:
1. Assign each external transmitter unit its own channel.
2. Place the receiver unit and transmitter unit within 1 meter
of each other and activate the manual search for availa-
ble signals from all connected outdoor sensors on the
main unit (weather station not included with delivery).
WARRANTY & SERVICE
The regular warranty period is 2 years and begins on the day of
purchase. To benefit from an extended voluntary warranty period
as stated on the gift box, registration on our website is required.
You can consult the full warranty terms as well as information
on extending the warranty period and details of our services at
www.bresser.de/warranty_terms
DISPOSAL
Dispose of the packaging materials properly, accor-
ding to their type, such as paper or cardboard. Contact
your local waste-disposal service or environmental
authority for information on the proper disposal.
Do not dispose of electronic devices in the household
garbage! As per the Directive 2002/96/EC of the Euro-
pean Parliament on waste electrical and electronic
equipment and its adaptation into German law, used
electronic devices must be collected separately and recycled in
an environmentally friendly manner.
CE DECLARATION OF CONFORMITY
Hereby, Bresser GmbH declares that the equipment
type with part number: 7009999 is in compliance
with Directive: 2014/53/EU. The full text of
the EU declaration of conformity is available at the
following internet address:
www.bresser.de/download/7009999/CE/7009999_CE.pdf
TECHNICAL DATA:
Measurement
Temperature range: -40-60 °C (-40-140 °F)
Temperature steps: 0.1 °C/°F
Humidity range: 20-95% RH
Humidity steps: 1%
Transmission
Transmission frequency: 868 MHz
Maximum transmission power < 25mW
Transmission range: 100 meters (free field)
Power supply
2x AA 1.5V batteries (not included)
Bresser GmbH
Gutenbergstraße 2
46414 Rhede · Germany
www.bresser.de
@BresserEurope
Bresser UK Ltd.
Suite 3G, Eden House
Enterprise Way
Edenbridge, Kent TN8 6HF
Great Britain
Advertisement
