Advertisement
Quick Links
Model #
373KFDC
DISTRESSED ANTIQUE CHERRY FINISH
Rustic Lodge Bench
Assembly Instructions
Congratulations!
This fine piece of furniture will make a handsome
addition to your home. For the best results, start by
reading the Assembly Instructions completely before
you begin your project.
For normal household use only.
recommended for commercial use.
Do not climb or stand on this piece of
furniture.
Natural characteristics
such as knots provide a
natural feel.
P.O. Box 2827
Eugene, OR 97402 USA
Service Policy:
which are defective, missing or damaged
during assembly. Please contact Whittier
Wood Products customer service department
directly (by phone, fax, mail or email) for
replacement parts.
Hours:
Our friendly customer service staff
can be reached Monday-Friday 7:00 a.m. to
5:00 p.m. (Pacific Time). A message can be
left 24 hours a day, 7 days a week.
To Order:
Provide the complete furniture
model number (upper left corner of this
page), part letter, production code, quantity
needed, reason for replacement and your full
name and address along with a telephone
number in case we need to contact you.
Parts ship from our Eugene, Oregon factory
within 1 or 2 business days from the time
we receive the request. Please allow 5-10
business days for delivery.
Outside U.S. or Canada: 541-687-0213
Outside U.S. or Canada: 541-687-0213
Fax: 541-687-2060 • Email: info@whittierwood.com
Fax: 541-687-2060 • Email: info@whittierwood.com
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Read the Assembly Instructions completely before
beginning.
Store the parts: 1) in their box; 2) in a dry place; 3) in
temperatures ranging from 40° to 90°. (Not on a cold,
possibly damp, cement floor.)
Inspect your furniture periodically for any loose glue
joints or screws, or any other problem which may
be affecting the stability of your furniture. Tighten or
repair as needed.
Production Code:
We will replace any parts
Rev. 10/05
Advertisement
Summary of Contents for Whittier Wood Furniture John Greenleaf Rustic Lodge 373KFDC
- Page 1 Model # 373KFDC DISTRESSED ANTIQUE CHERRY FINISH Rustic Lodge Bench Service Policy: We will replace any parts Assembly Instructions which are defective, missing or damaged during assembly. Please contact Whittier Wood Products customer service department directly (by phone, fax, mail or email) for replacement parts.
- Page 2 373KFDC Rustic Lodge Bench – Parts List BEFORE BEGINNING ASSEMBLY: Check that the quantities of the parts received match those on parts list below. D — Foot — Qty. 2 A — Top — Qty. 1 E — Middle Support — Qty. 1 B —...
- Page 3 373KFDC Rustic Lodge Bench ASSEMBLY INSTRUCTIONS TOOLS REQUIRED: Phillips screwdriver, Hammer, 5/32" Drill Bit, Drill, Tape Measure, 1/2" Socket. FIG. 1 FIG. 1A 1) Pound the Tack Glides (J) into the bottom of the Feet (D). Using the 3" Lag Bolts (G) and 5/16" Washers (H), attach a Top Support (B) and Foot (D) to each Leg (C).
- Page 4 FIG. 3 3) Center the leg assembly on the bottom of the Top (A). Insert the #12 x 2" Screws ( ) through the holes in the Top Support (B). Tap them lightly to mark the screw locations on the bottom of the Bench Top.