Summary of Contents for NIPUS NPSING02
- Page 1 INSTRUCTION MANUAL BUILT-IN BEVERAGE COOLER MODEL: NPSING02 Read this manual and follow all safety rules and operating instructions before first use of this Beverage cooler.
-
Page 2: Table Of Contents
TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS PRODUCT DIAGRAM INSTALLATION INSTRUCTIONS Before Using Your Beverage cooler To Install Stainless Steel Handle To Install Your Beverage cooler OPERATION INSTRUCTIONS Controls Storage Door Lock Shelves CARE & MAINTENANCE Cleaning Your Beverage cooler Power Failure Vacation Time Moving Your Beverage cooler Energy Saving Tips... -
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS Your safety and the safety of others are very important. This Beverage cooler complies with the applicable safety requirements and is safe for daily use. However, basic safety precautions should always be followed when using an electrical appliance, to reduce the risk of fire, electric shock, and personal injury. - Page 4 Do not use this wine cooler for other than its intended purpose. For indoor, household use only. Move this wine cooler by 2 people. Failure to do so can result in injury. Place this wine cooler in a well-ventilated area with temperatures above 15°C (60°F) and below 32°C (90°F).
-
Page 5: Product Diagram
PRODUCT DIAGRAM ° C ° ° ° Control Panel Top Hinge Safety Child Lock Wire Shelves Leveling Legs Exhaust Window Glass Door with Handle... -
Page 6: Installation Instructions
INSTALLATION INSTRUCTIONS Before Using Your Beverage cooler Remove the exterior and interior packaging. Check to be sure you have all of the following parts: 3 Shelves 2 Keys Stainless Steel Handle Instruction Manual 2 Extra Screws for Installing Handle IMPORTANT: Before connecting this Beverage cooler to a power source, let it stand upright for approximately 24 hours. -
Page 7: To Install Your Beverage Cooler
Illustration #1 Illustration #2 1 Gasket 2 Screw 3 Screw Driver 4 Handle To Install Your Beverage cooler - This Beverage cooler is designed for free standing or built-in (fully recessed) installation. - Place your Beverage cooler on a solid and level floor that is strong enough to support it when it is fully loaded. - Page 8 fluctuate, and the temperature range of 3ºC-18ºC (37ºF-65ºF) may not be reached. Connect the Beverage cooler to an exclusive, properly grounded, standard electrical supply (115 V AC only, 60 Hz), in accordance with the National Electrical Code and local codes and ordinances.
-
Page 9: Operation Instructions
OPERATION INSTRUCTIONS Controls After plugging the Beverage cooler into a wall outlet, the cooler would turn on automatically and the LCD screen would show the temperature inside of the cooler. After setting your desired serving temperature, allow the cooler to cool down for 3 to 4 hours before placing wine bottles in the Beverage cooler. -
Page 10: Storage
Storage Many cans and bottles may differ in size and dimensions. As such the actual number of bottles you may be able to store may vary.. Door Lock This cooler can be secured with a lock and key. The keys are located inside the plastic bag that contains the Instruction Manual. -
Page 11: Care & Maintenance
CARE & MAINTENANCE Cleaning Your Beverage cooler IMPORTANT: Always unplug the cooler before cleaning or performing maintenance. Never use harsh cleansers or scouring pads to clean any part of the cooler. Turn off the power, unplug the Beverage cooler, and remove all items including shelves. Wash the inside surfaces with warm water and baking soda solution. -
Page 12: Power Failure
Power failure Most power failures are corrected within a few hours and should not affect the temperature of your Beverage cooler. If the power is off for an extended period of time, proper steps should be taken to protect your contents. Vacation Time Leave the Beverage cooler operating during vacations of less than three weeks. -
Page 13: Troubleshooting Guide
TROUBLESHOOTING GUIDE PROBLEM POSSIBLE CAUSE SOLUTION The Beverage cooler may not be Ensure the Beverage cooler has been plugged in, or plug may be loose. plugged in properly. The Beverage cooler does not The Beverage cooler is turned off. Press to turn on the cooler. - Page 14 PROBLEM POSSIBLE CAUSE SOLUTION Not plugged in. Plug the cooler in. The circuit breaker tripped The light does not Check the breaker and/or fuses. or a blown fuse. work. The light button is “OFF”. Press to turn the light ON. The cooler is not leveled.
- Page 15 15 days upon receipt of the product. 2. Customers are entitled to free repair service from NIPUS for any product proven to be defective in material or workmanship, resulting in product failure during normal consumer usage and conditions within the valid warranty period.