SPECIFICATIONS TABLE Part Description ½ Turn Table Size ” Diameter Weight Capacity 2 Ton Per Pair Base Thickness 1.25” Plate Thickness 5/8” Construction All Steel Construction Lockable Position Locks At Zero Degree Mark Only Table Rotation 360 Degrees Side Movement 2”...
WHAT’S INCLUDED When unpacking, check to make sure all parts shown below are included. If any parts are missing or broken, please call Zackman Scientific at the number shown on the back cover of this manual as soon as possible.
Page 5
11. REPLACEMENT PARTS AND ACCESSORIES When servicing, use only identical replacement parts. Only use accessories intended for use with this product. Approved accessories are available from Zackman Scientific. 12. MAINTAIN THIS PRODUCT WITH CARE Keep this equipment clean, dry, and free of oil and grease.
OPERATING INSTRUCTIONS PROPER POSITIONING OF THE TURN TABLES CAUTION: Make sure the Turn Tables are positioned on a dry, flat, level surface capable of supporting the weight of the Turn Tables and vehicle being tested. Do not position the Turn Tables on an uneven surface or a surface covered with ice, grease, oil, or any other substance that may cause the Turn Tables to tip over or slide when driving a vehicle up onto the Turn Tables.
11. As with most vehicles, if the two Scale Plate (part #2) comparison readings differ from only 0 to 5 degrees, this will indicate no front wheel alignment adjustment is necessary. Should the comparison readings differ over 5 degrees, it is recommended that the front end wheel alignment be serviced by a qualified technician.
WARRANTY 1 Year Limited Replacement Warranty Zackman Scientific warrants that the product will be free from manufacturing defects for a period of one year from the date of its original retail purchase. How Long Is the Coverage? This warranty is for a period of one year from the date of its original retail purchase. This warranty is not transferable and coverage terminates if you sell or otherwise transfer the product.