Advertisement
Quick Links
Advertisement
Summary of Contents for Mobile Edge MEANKC1
- Page 1 Keypad User’s Manual...
- Page 2 Introduction Congratulations on your purchase of the Mobile Mini Keypad. System Requirements Microsoft ® Windows ® 98/Me/2000/XP and MAC OS X One USB v. 1.1 or 2.0 Compliant Port Installation Connection with Windows ® 98/Me Connect the keypad to your PC. The Add New Hardware Wizard appears.
- Page 3 (Recommended),” and then click Next. The wizard searches for the appropriate device driver. Click Finish to complete the driver installation. You are now ready to begin using your keypad. Windows 2000/XP Operating System Connect the keypad to your PC. The Found New Hardware Wizard appears and the OS will install the driver automatically.
- Page 4 Turning the keypad Off and On To turn on the keypad, press the CE/AC key. The keypad starts in calculator mode and displays “0”. If you connect with the computer, it starts in keypad mode. The keypad will automatically go to sleep mode after four minutes of non-operation.
- Page 5 In Keypad Mode: this key is Num Lock key. In Calculator Mode: First push displays “0”. CE/AC In the middle of a digit entry, a first Num Lock push will clear the entry register. In the middle of a digit entry, a III.
- Page 6 Calculator mode: Specifies the number of decimal places for rounding. Keypad mode: As the Tab function. Use this key in combination with arithmetic operator keys to perform percent. Switches the sign of the displayed value between positive (+) and negative (-). Change mode between the calculator and the MODE keypad status.
- Page 7 keypad and inputting characters from a notebook at the same time. Especially, it doesn’t need any drivers and fully support Plug & Play. No matter the Host’s Num Lock function status, users can choose the Num Key or direction key on the keypad. When users press the keypad’s Num Lock key once, it can change the keypad’s Num Lock status.
- Page 8 MEMORY Independent memory indicator Error indicator ‘ 3-digit separator (apostrophe) Indicate you are in calculator status CALC KEYPAD Indicate you are in keypad status Grant total Keypad Num lock ON status indicator Rounding Selector & Decimal Place Selector Use the Tab key to rounding selector Specified the rounding system Floating decimal point system, which displays the value without rounding.
- Page 9 monetary systems that require two decimal places. Two decimal places are not added in this mode if you press the DEL key while inputting a value, or for any operation other than addition and subtraction. Specification of CKP-60 Operation Force 60±15gm Total Travel 2.1 mm...
- Page 10 When you turn on the keypad, if the keypad’s LCD shows abnormal or nothing, check your battery first. If the battery is working fine, try to find an acicular metal and plug into the reset hole (in the back of the keypad). Then the keypad will work normally.
Need help?
Do you have a question about the MEANKC1 and is the answer not in the manual?
Questions and answers