Summary of Contents for Tek-Trol TEK-DP 1630A Series
- Page 1 Technology Solutions P 1630A Flow Nozzle Instruction Manual Document Number: IM-1630A www.tek-trol.com...
- Page 2 Crystal Lake, IL 60014 Tel: +1 847 857 6076 © COPYRIGHT Tek-Trol LLC 2021 No part of this publication may be copied or distributed, transmitted, transcribed, stored in a retrieval system, or translated into any human or computer language, in any form or by any means, electronic, mechanical, manual, or otherwise, or disclosed to third parties without the express written permission.
-
Page 3: Table Of Contents
......................5 Calibration and commissioning ..............5 Maintenance and Troubleshooting ..............5 Final Comments ....................6 Flow Nozzle Diagrams ..................6 Flanged Type: Pipe-wall Tapping (Figure 1.) ..........6 Flanged Type: Pipe-wall Tapping (Figure 1.) ..........6 Weld-In type......................7 www.tek-trol.com... -
Page 4: Safety Instructions
Trol Flow Nozzle Meters supported in between flanges on a natural gas or other in- line applications such as steam, water or other fluids, supplied by Tek-Trol and based on end user supplied process data sets and information related to the units supplied. -
Page 5: Packaging, Transportation And Storage
Avoid impact shocks to the device and prevent it from getting wet during • transportation. Verify local safety regulations, directives, and company procedures with • respect to hoisting, rigging, and transportation of heavy equipment. Transport the product to the installation site using the original • manufacturer’s packing whenever possible. www.tek-trol.com... -
Page 6: Product Description
This includes flow rate range, pressure and temperature rating, material compatibility, and calibration details if laboratory calibration was asked for. Please check the flow meter for any damage due to transport and contact Tek-Trol after sales service if transportation issues are found. -
Page 7: Flange Inspection
Perform calibration according to the transmitter manufacturer's /end user • guidelines. If “Tek-Trol High Performance DP Transmitters and Flow Computers” are being used, please refer to the specific installation manual for advice and set up methodology for the selected transmitter type. -
Page 8: Final Comments
Fig 1. Flanged Flow Nozzle Type with Pipe Wall Low-Pressure Tapping Flanged Type: Integral Low Pressure Tapping The Tek-Trol Flanged Flow Nozzle with Integral Low-Pressure Tapping is provided with the downstream tap integral to the nozzle's mounting flange. This design... -
Page 9: Weld-In
Fig 2. Flanged Flow Nozzle Type with Integral Low-Pressure Tapping’s Weld-In Nozzle Type Tek-Trol Weld-in Flow Nozzle types can be provided as a Mounting Ring Flow Nozzle design that eliminates the need for welding dissimilar metals in the field. Basic pipe... - Page 10 Tek-Trol is a fully owned subsidiary of TEKMATION LLC. We o er our customers a comprehensive range of products and solutions for process, power and oil & gas industries. Tek-Trol provides process measurement and control products for Flow, Level, Temperature &...
Need help?
Do you have a question about the TEK-DP 1630A Series and is the answer not in the manual?
Questions and answers