Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for NJ NJ-H2
- Page 1 User's Instruction Domestic flueless space heater Model: NJ-H2 THE GUARD ON THIS APPLIANCE IS TO PREVENT RISK OF FIRE OR INJURY FROM BURNS AND NO PART OF IT SHOULD BE PERMANENTLY REMOVED. Before using please read this instruction carefully 2531...
-
Page 2: Safety Precautions
SAFETY PRECAUTIONS: 2. Avoid placing clothing or any materials on the 1. Always use the heater in accordance with heater, as this could pose a fire risk or affect the user's instructions supplied with each heater. appliance's efficiency. Keep these instructions in a safe place. 3. - Page 3 Important Safety Instructions • Read the Manual First: Before using the appliance for the first time, make sure to read the instruction manual carefully. Keep the manual for future reference on how to use. • Safe Usage Locations: Use only in a well-ventilated areas. Do not use in leisure vehicles such as caravans and auto caravans.
- Page 4 Introducing our Domestic Flueless Space Heater: a mobile unit featuring essential safety features including an anti-tilt switch, oxygen detection system, and flame failure device. TECHNICAL CHARACTERISTICS Gas heater NJ-H2 Model Butane (G30), Propane (G31) or their mixtures Type of gas...
- Page 5 VENTILATION NOTICE Please be aware that your heater consumes oxygen during operation. To ensure safe use, it's crucial to have proper ventilation in the room where the heater is used. This facilitates the removal of combustion by-products and allows fresh air to enter. Appropriate ventilation significantly lowers the risk of condensation.
- Page 6 HEATER CONSTRUCTION 1. Control Knob 2. Ignition 3. Safeguard 4. Oxygen Detection Sensor (Within the pilot assembly) 5. Rear Cover OPERATING INSTRUCTIONS: There are 3 controls that you need to pay attention to. The first is the valve on the cylinder, which will be used to turn ON and OFF the gas supply. The second is the gas control knob with a dial which has 3 positions marked on it.
-
Page 7: Control Button
CONTROL BUTTON: Gas Control: LIGHTING INSTRUCTION The heater has three settings. Pilot Light (Pos.1) Minimum position (Lighting) (Pos.2) Medium position (Pos.3) Maximum position (Pos.4) Turn on the gas on the container LIGHTING: Use one hand, press down the control knob and set the it to the minimum position (Pos.2) at the same time press (do not hold) the piezo igniter key with thumb finger of the other hand while still holding down the control knob. -
Page 8: Service And Troubleshooting
SERVICE AND TROUBLESHOOTING No spark across Ensure that piezo-electric igniter Pilot will not light electrode gap. functioning correctly. automatically. Check that electrical lead is not damaged. Push the metal plate in front of the piezo ignitor closely to the ignitor so that the spark can make contact with the metal. - Page 9 STORAGE 1. Disconnect the cylinder and remove it from the appliance. 2. Store cylinders in a well-ventilated area away from combustible material. 3. The heater should be covered and stored in a dry, dust-free area in its original packaging. CLEANING 1.
-
Page 10: Disposal Of The Appliance And Packaging
11. Watch the pilot flame while it is in operation. It should burn steadily, if it flickers or is yellow tipped, the heater should be checked for correct operation. 12. If any parts need replacement, they must be replaced only with genuine original parts supplied by the manufacturer. - Page 11 Manufacturer: Fontron Ltd 1 Ravnogor str. 1756 Sofia, Bulgaria email: fontron@abv.bg tel.: +359889895084 Official distributor: NJ Commerce Ltd Unit C2 LHIE, Old Church road CV6 7NB Coventry, United Kingdom email: info@nj-commerce.co.uk Tel.: +447731715499 www.nj-commerce.com Version: 25 Sept 2023...