Advertisement
Megaphone
MP3 MODULE
To use the megaphone's MP3 module, slide the MIC - USB/SD switch to USB/SD
position. MP3 files can be played through the module using SD/MMC card, USB
device or AUX (3.5mm) input.
MP3 ON LED: LED glows to indicate power ON in the MP3 module.
: Press the button to Pause/Play the current track.
: Press once to go to previous track. Long press to decrease volume level
/V-
of module.
: Press once to go to the next track. Long press to increase volume level
/V+
of module.
M : Press the 'MODE' button to toggle between USB, SD/MMC card & AUX input.
NOTE : The 'MODE' feature can be used only when more than one source is
inserted in the USB module.
OPERATION ON Li-ion BATTERY
Open the back cover of the megaphone and remove the
!
cell container, which is fitted with 10nos. (AA) pencil
cells, from the cell compartment.
Use 11.1V Li-ion battery pack with 2pin lockable
!
connector, to plug into mating 2pin lockable connector
which is available in the cell compartment.
Insert this Li-ion battery pack in the cell compartment
!
and close the back cover.
Li-ion battery can be charged by connecting 12V 1A adaptor to the car battery
!
socket, available in the megaphone.
Charging LED is provided which turns RED to indicate Low Battery and turns
!
GREEN to indicate Full Battery level.
For best results, Li-ion battery should be charged before using the megaphone.
!
SD/MMC
Module ON
LED
Card Slot
Mode
USB
Button
Slot
3
AM-25DP
Previous/
Next/
Volume-
Volume+
AUX
Play/Pause
Input Jack
Button
11.1V Li-ion battery
with connector
AM-25DP
Advertisement
