CENTREGO 5K40 User Manual
  1. Manuals
  2. Brands
  3. CENTREGO Manuals
  4. Portable Generator
  5. 5K40
  6. User manual

CENTREGO 5K40 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Centrego
5K40
User
Manual
On-site ECA solution generator
Once the Centrego 5K40 device has been
installed on location, there is only the
need to check salt and water
levels for optimum operation.
The machine will produce disinfectant
solution on-site at a very low cost.
This significantly reduces the need
for purchasing synthetic chemical
disinfection products.
This manual covers the daily operation of the device using photographs and step-by-step guides.
There is also technical information on the Centrego 5K40 device and other information to support
device use.
If any further information is needed, please contact the manufacturer.

Advertisement

Table of Contents
loading

Related Manuals for CENTREGO 5K40

Summary of Contents for CENTREGO 5K40

  • Page 1 This manual covers the daily operation of the device using photographs and step-by-step guides. There is also technical information on the Centrego 5K40 device and other information to support device use. If any further information is needed, please contact the manufacturer.

  • Page 2: Table Of Contents

    CENTREGO 5K40 CENTREGO 5K40 Table of Contents 1.0 General ............ 4 1.1 Installation of 5K40 system ......4 Centrego 5K40 1.2 Introduction and intended use ....4 1.3 Design and compliance .........4 1.4 Symbols and meanings ........4 2.0 Safety ............5 2.1 Caution Use Only As Directed ......5 2.2 Directions for Safe Use ........5...

  • Page 3: General

    • Wash hands after use. People with sensitive or damaged skin should avoid prolonged contact with the product. Congratulations on the purchase of the Centrego 5K40. Before using this unit for the first time, please read • Keep out of the reach of children and pets.

  • Page 4: General Safety

    5°C to 30 °C The Centrego 5K40 is capable of producing 40 litres of solution every hour. The device will acept table and granulated salt mixed with water (brine), or sea water which is activated in the cell through electrolysis.
  • Page 5 CENTREGO 5K40 CENTREGO 5K40 SYSTEM SPECIFICATIONS & FUNCTIONALITY HMI touch screen controls On-site ECA solution generator User adjustable PPM output SOLUTION CERTIFICATION EN13727 Automated brine control to maintain selected PPM output EN14476 EN13624 Inputs - Potable water input and salt brine, or sea water...

  • Page 6: Device Layout

    2 - Stop/Reset button 3 - Air vent 4 - Sensor connections 5 - Fluid connections CAUTION: The 5K40 device is very heavy. Do not handle this machine without the appropriate health and safety training from your organisation. DANGER - Electric shock risk. Do not hande the power cable or internal components without full training from the manufacturer.

  • Page 7: Right Side Detail

    5.2 Right side detail 1 - Sensor control inputs 2 -Solution output 3 - Brine Input 4 - Water input 5 - Brine refil CAUTION: The 5K40 device is very heavy. Do not handle this machine without the appropriate health and safety measures.

  • Page 8: Front And Left Side

    5 - Door lock 6 - Stop/reset button CAUTION: before handling the water softener on the back of the 5K40 ensure that you read the full manufacturers manual for the device. Ensure the water softener goes through its cleaning process three times before using the device.

  • Page 9: Key For Door

    P 16 CENTREGO 5K40 CENTREGO 5K40 P 17 5.5 Using the door key To unlock the door push the key into the hole as shown. 5.4 Key for door Note: Do not use any other keys for The key to lock and unlock the door of the device is shown below.

  • Page 10: Handling

    When handling the device: Follow all health and safety training that you have had from your employer and or the manufacturer. Do not touch or use the device without full training from Centrego trained personel. CAUTION - Ensure a technician that has qualifications in electonics and plumbing installs and or uninstalls this device.

  • Page 11: Casing And Door

    P 20 CENTREGO 5K40 CENTREGO 5K40 P 21 7.1 Back of the control screen 7.0 Casing and door The back of the touch control screen has cables that supply power and online access to the screen and device. The device casing is manufactured by Schneider electonics. We do not recommend moving the device It is not recommended to do any of the following: removing, adapting or relocating any of these cables, plugging unless a trained staff member has removed all pipes and power connections.

  • Page 12: Screen Layout

    18 - Show General Information menu It can also be used remotely from a computer or 19 - Home button smart device if the Centrego 5K40 is connected to the internet using Schneider Software. 20 - Process button 21 - Trends stats...

  • Page 13: Home Screen

    P 24 CENTREGO 5K40 CENTREGO 5K40 P 25 8.4 Alarms screen 8.2 Home screen This device records any alarms triggered After turning the machine on at any point during operation. The option circled will say 'START' . If an alarm is activated, it will be logged Press 'START' and then this will show on to this screen.

  • Page 14: Stop/Reset Button

    P 26 CENTREGO 5K40 CENTREGO 5K40 P 27 9.0 Stop/reset button 9.1 Where is the button Pressing the 'STOP' button will stop the device completely. When released the machine will in standby mode waiting to be restarted. Release the STOP button To start machine see page 24.

  • Page 15: Internal Layout

    This shows the top half of the view of the device when the door is open. Do not touch or alter anything inside of the device unless fully trained by Centrego Ltd. DANGER - Electric shock risk. If the device has...

  • Page 16: Bottom Half Of Internal Layout

    12 - Moisture detector 13 - Solution outlet This shows the bottom half of the view of the device when the door is open. Do not touch or alter anything inside of the device unless fully trained by Centrego Ltd.

  • Page 17: Eca Cell Information

    Always contact your dealer or our service department. Always insist on genuine spare parts. About the solution produced by this cell The electrolysis equipment from Centrego Water Treatment Systems produces active chlorine in the form of sodium hypochlorite which is used for disinfection of water in municipalities, hotels, oil and gas, food processing and industrial processes.

  • Page 18: Brine Pump Ve3-Mf

    P 34 CENTREGO 5K40 CENTREGO 5K40 P 35 12.0 Brine Pump VE3-MF 12. 2 Pump manual links 12. 1 Location of pump in device Below are links so that further information can be found for this pump. This pump is at the bottom of the device...

  • Page 19: Troubleshooting

    This device uses a pump, amongst other components. These parts The 5K40 device makes an audible, will make an audible sound when rhythmic humming noise when it in use. This is normal and confirms produces the solution.
  • Page 20 SCAN FOR WEBSITE Centrego Ltd Address: Centrego Ltd, Unit N4, Marshall Way, Commerce Park, Frome, Somerset BA11 2FB, United Kingdom © Centrego Limited 2023...

Table of Contents