Zanussi FMW 5613 Instructions For The Use And Care page 22

Removing/replacing the oven door
1. Open the oven door so that it is in the
horizontal position.
2. With the aid of a coin move the two
retaining discs a quarter turn clockwise,
so that the two raised bars are to the
left hand side of the hinges (Fig. 13).
3. Raise the door halfway (Fig. 14).
4. At this stage the two hinges on either
side of the door must be clasped together
simultaneously. The door can then be
removed by pulling out and downwards,
maintaining the angle (Fig. 15).
To replace the door
1. Clasp the two hinges on either side of
the door together simultaneously.
2. Hook the top hinge into the top slot, so
that the hook is engaged with the roller.
3. Drop the lower hinge into the lower
slot, so that the notch is engaged.
Drop the door down so it is in the
horizontal position.