Features PATCHING The Attitude Solo supports up to one full universe of 512 DMX channels. With a total of 6 user configurable zones, the Attitude Solo can multi-task with ease! Zones are configured by fixture type, making it easier than ever to get set up.
Attitude Solo (2nd Generation) Shows Creating awesome shows with the Attitude Solo is easy! Simply select up to 4 colors, adjust the show type and options, and give your show a name. Seven brand-new show types make it easier than ever to create epic lightshows. Plus, options for each show type include speed, size, direction, and splits.
Page 5
Display The Attitude Solo is configurable via the onboard 2.8" touchscreen LCD display. The blue title bar indicates the name of the current menu, and the list of white items below indicate menu items. Each item can be tapped, which either opens a sub-menu or pop-up.
Step-By-Step Installation POWER SUPPLY The Attitude Solo can be used with any 12 volt power supply. Cut and strip the wire from your power supply and locate the positive and negative wires. Strip about 1/4" of insulation off of the end of each wire. Unscrew each terminal of the power input until there is space in the terminal for the new wire.
3 Patch Zones The Attitude Solo supports 6 unique Zones. Each zone can be used to control a separate group of lights. For example, you might have all lights on the inside of a building in Zone 1, and all of the lights on the outside of the building in Zone 2.
Page 8
User Manual Attitude Solo (2nd Generation) When in automatic addressing mode, the Attitude Solo will list what the start address of the first fixture should be inside each Zone menu. In manual addressing mode, the Solo will give an option to select the start address of the zone as well as list the last address used by the previous zone.
Selecting Colors The Attitude Solo FX engine allows for up to 4 colors to be used as "steps" in the show. Colors set to black will be ignored. To set up a Show, from the Main Menu, go to Shows, then select a show.
Color 2 would be set to white, and Color 3 would be set to blue. Show Types The real power of the Attitude Solo show engine is in the variety of patterns that can be created simply by selecting a show type and configuring options.
Page 11
User Manual Attitude Solo (2nd Generation) All Fade The All Fade (FADE) show type fades all lights simultaneously across the selected colors. All connected lights in the zone will illuminate the same color. Lights will smoothly fade between each active color selected, sequentially from Color 1 to Color 4 and then repeat.
End - runs from ends to middle Although this manual attempts to adequately describe the functions of each show type and option, to best understand how the Attitude Solo show engine works, we suggest connecting a Solo to some fixtures and playing with it. Try changing each show type and option and see how the fixtures react.
Zones can also be set to OFF. Setting the Clock The Attitude Solo includes a built-in 24 hour clock, which is how events are processed. To set the current time on the clock to match the local timezone, from the Main Menu, go to the Settings menu, then set the Hour and Minute to match the current time.
Every 30 seconds or so, the Attitude Solo checks the time, and if the current time matches the saved time for any event, it updates each zone based on what show the event says that zone should play.
Previous models of the Attitude Solo have operated in a different manner, where the trigger is only active while connected and that all zones showed a single color with the trigger.
User Manual Attitude Solo (2nd Generation) 7 Troubleshooting The following steps can help you troubleshoot your Attitude Solo device. For further information or help troubleshooting problems not described here, please contact J Squared Systems. Device Not Powering On Confirm the power supply is powered on and connected properly to the power input connection on the Attitude Solo.
Page 17
User Manual Attitude Solo (2nd Generation) Connected Fixtures Glitching Confirm that the connected fixtures are wired correctly to the DMX output. Confirm that there are no cross connections between DMX wires; check that no copper wire strands are accidentally touching between pins.
Attitude Solo (2nd Generation) 8 Further Information Contact For questions regarding the content of this User Manual or your Attitude Solo, please contact our Lead Research & Development Engineer at drew@jsquaredsystems.com For sales inquiries, please reach out to our team through the channels below.