Safety Voice Functionality Activation; Importing And Exporting Settings And Phone Books - Flightcell SVS Installation Manual

Safety Voice Functionality Activation

Each modem onboard the SVS can be configured to operate in safety voice mode. This extends
the standard SATVOICE functionality to provide call priority and call pre-emption awareness to the
user.
By default, the SVS will be configured with safety voice functionality enabled on the primary
modem and disabled on the secondary modem. This setting should be enabled for any modems
with an ATS safety voice SIM card installed.
To activate or de-active the safety voice functionality on a modem set the following settings to YES
or NO respectively:
»
M1_SAFETY_VOICE_EN
»
M2_SAFETY_VOICE_EN

Importing and Exporting Settings and Phone Books

SVS settings and phone books may be exported and imported.
Settings files on an SVS can be exported to enable settings to be replicated across multiple SVS
units.
Phonebooks can be imported and exported, enabling the phonebook to be edited offline, and
replicated across multiple SVS units.
Both settings files and phonebooks are Tab Separated (TSV) files and are imported and exported
via a webserver through the ethernet interface.
To access the SVS webserver, configure the host PC to use the ethernet interface as described in
Using the Ethernet Interface on Page 16 and open the following URL in a web browser:
http://169.254.1.1
The following page will be displayed.
To export a file, right click on the file name link and select
To import a file, browse for the file and click Upload.
117-00002 Flightcell SVS Installation Manual Rev 1.2 Effective date 20 September 2023
Save as
.
Page 21