Related Manuals for AsReader BOX-Type Mini ASR-P37U
Summary of Contents for AsReader BOX-Type Mini ASR-P37U
- Page 1 BOX-Type Mini User Manual ASR-P37U Copyright © Asterisk Inc. All Rights Reserved. AsReader ® is registered trademarks of Asterisk Inc. Other company and product names are generally trademarks or registered trademarks of their respective companies.
- Page 2 BOX-Type Mini User Manual Revision History Version Modified Contents Date V1.0 Initial version 2023/11/06 ASTERISK INC.
-
Page 3: Table Of Contents
BOX-Type Mini User Manual Contents About BOX-Type Mini 3 1.1. Introduction 3 1.2. Safety instructions 6 1.3. Product appearance 9 1.4. Specifications 10 Basic operations 11 Working mode 13 How to connect (Serial mode) 15 ASTERISK INC. -
Page 4: About Box-Type Mini
Thank you for purchasing the BOX-Type Mini ASR-P37U. This manual describes how to operate the BOX-Type Mini ASR-P37U (hereinafter referred to as the ASR-P37U, or the AsReader). Please read the manual carefully and keep it as long as you have the device. - Page 5 BOX-Type Mini User Manual If you have any comments or questions about this manual, please contact us: AsReader Inc. (United States) Toll Free (US+Canada): +1 (888) 890 8880 / Tel: +1 (503) 770 2777 x102 920 SW 6th Ave., 12th Fl., Suite 1200, Portland, OR 97204-1212 U.S.A.
- Page 6 BOX-Type Mini User Manual (2) Our products are used in unexpected ways. (3) Modification of our products by any person or company other than our company. (4) Use outside of the country where the products are purchased. ASTERISK INC.
-
Page 7: Safety Instructions
Doing so may cause a large current to flow, resulting in overheating, fire, or damage to the device. Do not get the AsReader wet with water or any other liquid. Doing so may result in fire or electric shock. If foreign matter or water does get inside the AsReader, unplug the power cable immediately. - Page 8 If you notice any abnormalities, please discontinue use and contact your distributor immediately. Do not place the AsReader in direct sunlight or where the temperature is very high, which will damage the data cable and components, or cause fire. Do not place the product on an unstable surface such as a wobbly table or a tilted place. It may fall and cause damage.
- Page 9 BOX-Type Mini User Manual This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant part Rules. These limits designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
-
Page 10: Product Appearance
BOX-Type Mini User Manual Product appearance 1.3. FIG. 1-3-1 Appearance (Front) FIG. 1-3-2 Appearance (Back) ASTERISK INC. -
Page 11: Specifications
BOX-Type Mini User Manual Specifications 1.4. Model ASR-P37U ISO/IEC 18000-63 (Former 18000-6C) / EPCglobal Spec Class 1 Gen 2 Japan: 920.6 ~ 923.4MHz Radio frequency North America: 917.1 ~ 926.9Mhz Europe: 865.7 ~ 867.5Mhz RFID Japan: Max 200mW (23dBm) RF output power North America: Max 500mW (27dBm) EU, UK: Max 500mW (27dBm) Antenna terminal... -
Page 12: Basic Operations
BOX-Type Mini User Manual Basic operations ⚫ Connect an antenna Please connect the RF cable of an antenna to the Antenna Terminal (see FIG. 1-3- 1①) of the ASR-P37U. FIG. 2-1 Connect the antenna ASTERISK INC. - Page 13 BOX-Type Mini User Manual ⚫ Power on/off Use the USB Type-C data cable to connect the ASR-P37U to a power adapter via the Power & Communication Port (see FIG. 1-3-1⑤). The LED Indicator flashes slowly when power on is successful (see FIG.
-
Page 14: Working Mode
BOX-Type Mini User Manual Working mode ◆ The ASR-P37U has two working modes: HID mode and Serial mode. ⚫ HID mode HID (Human Interface Device) mode: When this product is connected to a mobile device (or a PC) in HID mode, this product is recognized as a keyboard, and the data read by this product is sent to the mobile device (or the PC) “as is,”... - Page 15 BOX-Type Mini User Manual ◆ How to read RFID tags in the HID mode? When the ASR-P37U is powered on, put RFID tags close to the Antenna of the ASR-P37U FIG. 1-3-1① FIG. 1-3-1② (see ). Press the “SCAN” Trigger Button (see ), and the blue light flashes quickly.
-
Page 16: How To Connect (Serial Mode)
BOX-Type Mini User Manual How to connect (Serial mode) Operation steps: ◆ Android ⚫ Method 1 (with a power adapter) Power on the ASR-P37U (see Power on/off). Launch the ASR-P3xU app for Android. Connect the Android device and the ASR-P37U with USB Type-C to USB Type-C data cable via the Communication Port (see FIG. - Page 17 BOX-Type Mini User Manual ⚫ Method 2 (without a power adapter) Launch the ASR-P3xU app for Android. Connect the Android device and the ASR-P37U with a USB Type-C to USB Type-C data cable via the Power & Communication Port. The LED Indicator stays ON when the power is on, and the connection is successful.
- Page 18 BOX-Type Mini User Manual ◆ Windows 1. Use the USB Type-C data cable to connect the ASR-P37U to a Windows device via the Power & Communication Port. The LED Indicator stays ON when the power is on, and the connection is successful. There will be two buzzing prompts. 2.
- Page 19 BOX-Type Mini User Manual AsReader BOX-Type Mini (ASR-P37U) User Manual Nov. 2023 1 Edition AsReader Inc. 920 SW 6th Ave., Ste 1200 Portland, OR 97204-1212 U.S.A. Tel.: (503) 770-2777 x102 Asterisk Inc. AsTech Osaka Building 5F, 2-2-1, Kikawa-nishi, Yodogawa-ku, Osaka, 532-0013, Japan...
Need help?
Do you have a question about the BOX-Type Mini ASR-P37U and is the answer not in the manual?
Questions and answers